Activity while no projects open

I have a question regarding the activity when no projects are open.

Asio guard and peak jump periodically almost to the top…

and I do not understand what the problem may be.

Will appreciate any suggestions.

Thanks

Hi there. This usually happens when the HD or SSD has a problem. It may be another thing but the meters go crazy when the HD or SSDs are faulty.

brand new system.

are you talking about the HD on which nuendo is installed?

What helped (~80% improvement):

I removed CPU 0 from Nuendo’s processor affinity. It seems the audio engine is conflicting with system processes/interrupts running on the first core, which causes the phantom ASIO-Guard spikes.

is this a known regression in 15.0.30? Several users on the forum seem to have similar symptoms, and the issue was not present in 15.0.20. Could someone from Steinberg confirm whether this is being investigated, and if a fix is planned for the next maintenance update?

There are a lot of different CPU architectures with different core structures that may cause issues like yours, so there is no universal fix for this.

First of all. I can see that you’re using a VB Matrix driver as the ASIO driver, which may be the culprit. Is there a dedicated driver for your audio interface that you can use instead? Does the meter still jump when you select that?

Second, try enabling “Steinberg Audio Power Scheme”. This will make sure your CPU operates at it’s maximum performance.

Also check in your BIOS and disable “C-states” if that is possible on your machine.

If none of these suggestions help, download ParkControl

This lets you control and turn off the core parking of each individual core of your CPU. Core parking is built into windows, and is meant to save power while a core is not used. This behaviour can cause issues in Nuendo.

Thanks for the suggestions. Let me go through them one by one.

On the ASIO driver:
I already tested this. I tried VB-Matrix VASIO-64A, Dante, and the native Steinberg ASIO driver — the behavior is identical on all three. So the driver is not the culprit in my case. I should have mentioned this more clearly in the original post.

On Steinberg Audio Power Scheme:
I enabled it. It didn’t change the ASIO-Guard/Peak behavior — the meters still jump with no project open.

On C-states:
I checked the BIOS and C-states are already disabled on this machine. So that’s not it either.

On ParkControl:
I haven’t tried it yet, but I’ll give it a look.

What actually helped:
Removing CPU 0 from Nuendo’s processor affinity gave me roughly an 80% improvement — the phantom spikes are mostly gone. This strongly suggests the issue is not CPU architecture per se, but a conflict between the audio engine and system processes/interrupts on the first core. The fact that it appeared only after 15.0.30 and was not present in 15.0.20 also points to a regression in the update rather than a hardware-specific problem.

I appreciate the suggestions, but I think this is worth escalating to Steinberg as a potential bug in 15.0.30, since multiple users are reporting similar symptoms across different CPU architectures and audio interfaces.