Control Room - Can't select audio device for Cue 1

[Reco29]

Hi,

1. Add a Cue to your Control Room under Studio/Audio Connections/Control Room
   Do not assign any audio device or port to it

2. Add an audio track and name it "Cue Track" for now
   Open the Inspector in the Project Window and open your Output Routing here
   

   

Select “No Bus” in the second drop down menu of this Routing tab.

3. Open your MixConsole
   Go to the upper right corner, click on the tiny cogwheel to the right and make sure that the box “Cue-Sends” is checked
   
   

Go to your Cue Track and activate the Cue Send by clicking here

Make sure that this Cue Send is exclusivly reserved for this particular track

4. Listening to your Cue
   Import/Drag your reference track/song etc on your Cue Track in the Project Window

Now, you can choose between your Mix and your Cue in the Control Room by clicking here

Little extra tips:
A Go to your Cue Track in the project window and click on its Solo button while holding alt (option). Now the S is turning into a D (defeat solo). This way you’ll never accidently mute this track - you can only hear it if you choose the Cue in the Control Room so it doesn’t interfere with anything.

B You can add track versions (Inspector) to your Cue Track. This way you can switch between multiple references using only one single Cue.

I hope I didn’t forget anything.

Enjoy