# Cubase 11 and URC44 Control Room Set-up **URL:** \ **Category:** Cubase\ **Created:** [April 25, 2022, 1:35am UTC](https://forums.steinberg.net/t/cubase-11-and-urc44-control-room-set-up/782621 "2022-04-25T01:35:20Z")\ **Posts on this page:** 1\ **Showing post:** 4
**Author:** ![robw](https://avatars.discourse-cdn.com/v4/letter/r/8edcca/32.png) [@robw](https://forums.steinberg.net/u/robw)\ **Post date:** [April 29, 2022, 2:06am UTC](https://forums.steinberg.net/t/cubase-11-and-urc44-control-room-set-up/782621/4 "2022-04-29T02:06:23Z")
So here’s an old post with brief description of my setup. Note I’m using Control room so Mix 1 is my Mains and Mix 2 is my headphones - but the same principle applies. The full thread has a few links to youtube videos which may have more details. I thought I had an old post with actual pictures describing the full configuration. This question gets asked quite a bit so you may find some more youtubes and posts on the topic. Anything UR44 (not C) will apply to your device. > [@UR44 PLEASE HELP...!!!](https://forums.steinberg.net/t/ur44-please-help/120215/17): > > I’m away from my DAW (by roughly half a planet of distance) but I will guess a little at the questions and suggest a setup based on how I use my UR44 with Cubase. Unfortunately I can’t show images which would make this a lot easier. I’ll use dot points since it will be a week before I get back. It might get you started - it might just confuse but I’ll show images when I get back if you are still stuck: Cubase is fully integrated with Ur44 and provides Direct Monitoring, DSP for Reverb and Guit… --- _[View the full topic](https://forums.steinberg.net/t/cubase-11-and-urc44-control-room-set-up/782621)._