# Cubase 12 Pro /Windows 11: CPU 0 spikes to 100% with ACPI.sys interrupts even when playback stopped

**URL:** <https://forums.steinberg.net/t/cubase-12-pro-windows-11-cpu-0-spikes-to-100-with-acpi-sys-interrupts-even-when-playback-stopped/1046539>\
**Category:** Cubase\
**Tags:** cubase-12\
**Created:** [November 18, 2026, 12:42pm UTC](https://forums.steinberg.net/t/cubase-12-pro-windows-11-cpu-0-spikes-to-100-with-acpi-sys-interrupts-even-when-playback-stopped/1046539 "2026-11-18T12:42:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Antoine\_AURECHE](https://avatars.discourse-cdn.com/v4/letter/a/f9ae1b/32.png) [@Antoine\_AURECHE](https://forums.steinberg.net/u/Antoine_AURECHE)\
**Post date:** [November 18, 2026, 12:42pm UTC](https://forums.steinberg.net/t/cubase-12-pro-windows-11-cpu-0-spikes-to-100-with-acpi-sys-interrupts-even-when-playback-stopped/1046539/1 "2026-11-18T12:42:23Z")

</div>

Hi everyone,

**Only 1 of my 16 logical processors (CPU 0) intermittently reaches nearly 100% utilization for tens of seconds**, while overall CPU usage remains low. Cubase’s ASIO-Guard meter spikes during these episodes, and I sometimes hear audio crackles. I’m trying to find out what triggers the CPU 0 saturation.

**My setup**

- Lenovo ThinkStation P350 Tiny, type **30EF** , model **30EF000HFR**
- Intel Core i9-11900T with **8 physical cores and 16 logical processors** , 64 GB RAM
- NVIDIA T600 and Intel UHD Graphics 750
- Windows 11 Pro 26H2, build **26300.9974**
- Windows on the internal SSD ( **C:** ), projects normally on an external SSD ( **D:** ), and sample libraries on a separate external SSD ( **G:** )

**Cubase and audio settings**

- Cubase 12 Pro with an RME Babyface connected via USB, using the official **ASIO Fireface USB** driver.
- **ASIO-Guard is normally set to High.** I also tested with ASIO-Guard disabled, and the CPU 0 spikes still occurred.
- The spikes also occurred with a **2,048-sample buffer at 44.1 kHz** and in a separate test using the **Generic Low Latency ASIO Driver**.

**When the spikes occur**

The spikes start appearing as I add more plug-in instances to a project. I’ve reproduced them with different plug-ins and in multiple projects. They can happen **while playback is stopped** , after the sample libraries have finished loading and Task Manager shows 0% activity on the sample drive.

- **Project on the internal SSD.** I opened a project from **C:** instead of the external project drive **D:**. The same spikes occurred. The sample libraries were still on **G:**.
- **Cubase open with no project loaded.** I saw no spikes during a short check on the welcome screen. My usual production projects reproduce the spikes much more reliably than an empty project.
- **Cubase closed.** The recurring spikes stopped. I saw one isolated spike about 30 seconds after closing Cubase, without checking whether its process had fully exited. I saw no further spikes while Cubase remained closed.

**Processor affinity test**

I changed the processor affinity of `Cubase12.exe` in Windows Task Manager to exclude **CPU 0 and CPU 1** , leaving logical processors **2–15** available to Cubase. **With Cubase still open and its threads restricted to CPUs 2–15, CPU 0 still spiked to nearly 100%.**

**What I measured**

During one spike, Task Manager showed approximately **5.5% total CPU usage for System Interrupts** , falling to **0.19%** afterward. An Adobe process was active during one episode. I didn’t see the same process during the next spike I checked. I also checked Windows Event Viewer and found no event that explained the spikes.

I recorded two `.etl` traces using Windows Performance Recorder’s `GeneralProfile` and examined them in Windows Performance Analyzer.

- The first trace started during a spike. It shows roughly **180,000 ISR events** attributed to `ACPI.sys!ACPIInterruptServiceRoutine` in the first **15 seconds**. The dominant sampled call stack includes `ntoskrnl.exe!HalpAcpiPmRegisterRead` and `HalpAcpiPmRegisterReadPort`. The ACPI activity dropped as the Cubase spike ended.
- The second trace, recorded after the BIOS update, shows two sustained bursts dominated by `ACPI.sys`, at approximately **0–28 seconds** and **69–101 seconds**.
- LatencyMon also flagged `ACPI.sys`, `nvlddmkm.sys`, and `ntoskrnl.exe`. The source of the sustained ACPI interrupts is still unknown.

**Other tests**

- I used the Windows High Performance power plan, with minimum and maximum processor states at 100% and PCIe Link State Power Management off.
- I set Cubase to use the NVIDIA T600 in Windows Graphics Settings. The spikes persisted.
- I updated the Lenovo BIOS from **M3JKT46A to M3JKT47A** through Lenovo Commercial Vantage. The spikes persisted after reboot.

Has anyone seen **CPU 0 spike to nearly 100% with Cubase open, even when Cubase’s processor affinity excludes CPU 0**? If you found the cause on your system, what was it? I’d also appreciate a targeted, reversible diagnostic step I can run with my usual projects and plug-ins while preserving my Windows installation, licenses, and settings.

Thanks,  
Antoine

---

<div class="post-metadata">

**Author:** ![SuperG](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/superg/32/149927_2.png) [@SuperG](https://forums.steinberg.net/u/SuperG)\
**Post date:** [November 18, 2026, 5:21pm UTC](https://forums.steinberg.net/t/cubase-12-pro-windows-11-cpu-0-spikes-to-100-with-acpi-sys-interrupts-even-when-playback-stopped/1046539/2 "2026-11-18T17:21:17Z")

</div>

> [@Antoine\_AURECHE](#):
>
> - enovo ThinkStation P350 Tiny, type **30EF** , model **30EF000HFR**

I had problems when speed shift (Turbo) was enabled in the bios in my i9-1400KF. It was causing issues with my Nvidia RTX4090 - the nvidia was rapidly changing its current draw in response and that caused a host of issue elesewhere.

The second issue was having RAID enabled (but unused) despite having only SSD drives. I turned that off.

Lastly - I enabled low latency mode in the NVidia app and set it to ultra.
