Hello, I have a problem with CUBASE 7.5. When I want to assign the entry to record, when it naznacheniie in connect options POPs up a blue screen Sometimes I close the project it closed, and when close CUBASE 7.5 then again when closing occurs blue screen, and if the project is not very busy then everything is OK and the system crashes, no, but if the project is to involve more then a blue screen is displayed only when closing Cubase, or changing the destination channel, what could it be? This system Intel i7-2600 3.40Hz, MB ASUS P8P67 EVO,16 Gigabit memory 1333, system : win 7 X64, CUBASE 7.5.20 x32, controller 1394 Texis instruments, video Nvidia GTX650, sound cards M-Audio Profire 610,. Dreyer to sound the most recent. Help Me 
Why in CUBASE 7.5 when closing the program, you receive a blue screen? My system Intel i7-2600 3.40Hz, MB ASUS P8P67 EVO,16 Gigabit 1333 memory, system : win 7 X64, CUBASE 7.5.20 x32, 1394 controller Texis instruments, Nvidia video GTX650, sound cards M-Audio Profire 610
Blue Screens in Windows are almost always caused by a hardware device. I would make sure all your drivers are up to date.
It’s the M-Audio driver…do you have the latest version??
If yes then you might have to work with ASIO4all driver instead or if you want to still use M-Audio driver you can select no driver in devices every time before exiting.
There is plenty of info online about this…you can google it and see if you find any better options.
Yes, the drivers past, if I change the sound card may it be stopped?
so what is the matter? case in sound card? I understand you correctly? and if I change it to another, all should work? sometimes when assigning a channel in the settings of Cuba with a project open, a blue screen POPs up(may be a problem in the motherboard?
if you wouldn’t give links to these materials, I will examine
Hello,
Please completely shut down your PC, disconnect the firewire cable from your PC for your M-Audio Profire 610 device, restart the PC, and then open Cubase 7.5.20, open that same problematic project, fiddle around with it a bit, and then close it, and tell me if the same BSOD error occurs.
Thank you!
.
so what is the matter?
A driver incompatibility
case in sound card?
Not sure what this means, sorry
I understand you correctly?
I don’t know!
and if I change it to another, all should work?
Updating the driver to latest version might fix it…did you check this??
Using ASIO4all driver instead of M-Audio fixes it & selecting no driver before exiting Cubase fixes it (well works around it). If you replace the card with a non M-Audio soundcard that should also fix it, but may not be necessary.
sometimes when assigning a channel in the settings of Cuba with a project open, a blue screen POPs up(may be a problem in the motherboard?
When you say pops up…you mean the entire screen turns blue…the infamous WIndows BSOD??
This is likely the same problem…not likely anything to do with the motherboard.
if you wouldn’t give links to these materials, I will examine
Just Google Cubase M-Audio blue screen
ок
I reinstalled the drivers opened the projects in which there was a blue screen, so far everything seems working, but the problem is it doesn’t, you will have to change the sound card, looked after Steinberg U28M
just a little worked with the project, closed the project, and then when pressed close Cubase, again a blue screen now make a screenshot of the screen
Have disabled the sound card opened the project, 2 times opened closed, the closing Cubase all OK to change the sound card?
Why is this error blue screen?
Well probably because of the reason I already told you…have you tried the asio4all driver??
We do not officially support the 3rd party ASIO4ALL driver, but you can try it and see if the BSOD still occurs:
http://tippach.business.t-online.de/asio4all/downloads_11/ASIO4ALL_2_11_English.exe
Tomorrow I will try, I will unsubscribe
Tomorrow I will try, I will unsubscribe
Set the asio4all driver, put the latency 128, opened several projects at closing CUBASE 7.5 blue screen does not display, even when change driver settings or change inputs outputs blue screen, too, there is the blue crane. So what is it that M-audio profire 610 curves driver? and all this time I was tormented with a blue screen? The sound quality with asio4all driver sound quality will remain the same? i.e. just this driver has replaced the buggy native M-audio? Thank you very much, I am still a little projects reveal different, I hope more of this with off-screen will not, and finally, you can work in your favourite program and to be creative and not clarifying the causes glitches driver M-audio. Thanks again for the help
The sound quality with asio4all driver sound quality will remain the same? i.e. just this driver has replaced the buggy native M-audio?
Yes…the driver has no effect on the sound. Glad it worked for you.