Cubasis LE3 no input from ur22c

No input from UR22C on iPad Pro using Cubasis LE2 or Cubasis LE3

I have my UR22C connected to my iPad Pro via Usb C. I can play back earlier projects but there is no signal getting into Cubasis le3 from Input 2 on the UR22C. The UR22C has been updated to the latest firmware and it works fine with Cubasis on my Mac mini. Other DAW software also works fine with the UR22C on my iPad Pro so I don’t think the UR22C is at fault, The iOS dspmixfxURc app works fine with my iPAD. I have re-booted my iPad, deleted Cubasis LE3 and re-installed it.

4. Actual Results
I created an audio track, routing channel 2, monitoring is “ON”. Guitar plugged into UR22C input 2. . UR22c mix set to DAW.There is no signal showing on the Channel fader and no audible out out on my speakers connected to the stereo outputs on the back of the UR22C. It all works fine if I use another DAW eg Amplitude.

5. Environment
iPad Pro IOS version 14.4, UR22C firmware Boot V1, Main V1.5
Cubasis LE3 version 3.2.1

Hi @steven.wilkinson,

Thank you for your message and welcome to the Cubasis forum!

Please have a look at our Getting started with Cubasis tutorial, which also includes a dedicated chapter about audio routing.

Alongside, please make sure, Cubasis has access to the mic:

Starting Cubasis the very first time, a popup asking your permission to use the microphone appears, which has to be accepted.
If you tapped “no” by accident, please change the setting manually as follws:

  • Please go to the iPad settings
  • There please go to Privacy / Microphone
  • Please make sure to enable Microphone use with Cubasis.

Please let me know if this helps to solve the problem.

Best,
Lars