. Actually when Direct Monitoring is used (mandatory for most serious recording session work), the input channel signal is muted inside Nuendo. It is only routed to disk during record. That mean that in Direct Monitoring mode, using for example a send in the audio track does not work for the input…

Name: How to RECORD with EFFECTS and WITHOUT LATENCY
Uploaded: 2019-07-28T22:34:04Z
Description: Wrong… Have no problem with this… Please check this video: [How to RECORD with EFFECTS and WITHOUT LATENCY] :bulb:

DM routes the signal directly from the soundcard to the output. No signal is passing through the DAW. So it is not possible to have any control over those signals. Except when you use RME cards, they have Totalmix, which is a software layer put directly on the soundcard. But that is pretty compli…

. Fredo i think that you did not understood my request. To make things really clearer, I just did check how works another big name DAW : Protools have an option for what i want. From a release note (LLM = Direct Monitoring in the Nuendo world): “Allow Sends to persist during LLM Normally when…

+1 good points here! An for sure easy to implement! Just cut post fader, not pre filter/gain stage! Thats all actually. That is what PT changed now. Nothing you could live without, but a handy feature now and than… (reverbs for ex.) But a more interessting point would be, DM selectable for chan…

+1 You are right basicX, auto talkback or listen mic with a vst plugin is another example that cannot work actually in Direct Monitoring mode because input signal is muted at the pre stage of the audio track channel. As a side note, auto talkback / listen mic could implement this function directly…

i guess that is not usefull. You would get a double monitor situation. One from DM, and one thru the Nuendo mixer! Thats exactlly what DM should “auto disable!”. But apart from this - your FR is very very interessting and should be considert by the SB develop team! +1 !!!

. Here is the Protools option to be able to use Direct Monitoring with software plugins like reverbs : “Allow sends to persist during LLM” LLM = Low Latency Monitoring. It is named Direct Monitoring in the Yamaha / Steinberg World. No more hassle with DSP reverbs prehistoric GUI interface, a…

And here is how Apogee does solve this problem on Element audio interfaces : [Apogee Element Control Tutorial - Low Latency Recording with Reverb] Not the simplest way to do it… but it’s here.

Wrong… Have no problem with this… Please check this video: [How to RECORD with EFFECTS and WITHOUT LATENCY] :bulb:

Wrong… Have no problem with this… Please check this video: https://youtu.be/RuOn6qEs4z4 :bulb: No, This video show a setup with a Lynx interface, with its mixer application, and does not make use of Direct Monitoring mode. This is not the same thing at all and it is not possible to do…

No. This has NOTHING to do with “Lynx only” or so - you can do this with any converter you like… I use RME, Focusrite, Apogee e.g. = no problem with this wonderful handling at all. :bulb: BTW, it would be nice if you take a shorter shot… I have to scroll forever with my smartphone. Not g…

[FR] Software Reverb with Direct Monitoring - move DM track channel mute after inserts and sends

Nuendo

Centralmusic July 28, 2019, 10:34pm 9

Wrong…

Have no problem with this…
Please check this video: