Je ne me suis pas abonné, j’ai dû payer un peu moins de 10€ cet été et c’est tout. Le logiciel est très intéressant.
Je ne me suis pas abonné, j’ai dû payer un peu moins de 10€ cet été et c’est tout. Le logiciel est très intéressant.
That synopsis on your intentions for TAB sound fantastic! I can’t wait to see it on my machine
As a music engraver I’ve been using Score for guitar notation (notes+tab) for thousands of pages… Paired with Score’s ability to create complex macro it was by far the easiest and most powerful way to create all styles of tabs for any kind of fretted instrument. I really hope Dorico’s Tab notation will be as easy and powerful.
I’d like to specify my feature proposition post from Feb 2nd concerning pedal steel notation:
Instead of offering predefined forms simply make possible that users can load and trim their own graphics to be used as diacritical remarks. There is a small risk people will import, say, Christmas trees into their notation, but it would assure maximum freedom in deciding how to set up psg notation.
Another source of frustration in virtually any other notation software: Setting barré indications IS and always has been a tedious hassle! Since there are many different tastes out there, from people preferring simple “staples” to others who want a complex graphic (indicating the strings to be pressed (=vertical line), the duration (=horizontal line), the fret #, the finger # doing the barré – have I forgotten something?) it would be best you do a barré editor as well and let users decide if fret or finger numbers are inline (= the line is interrupted to make room for the number) or outside, if lines are thick or thin, wavy or straight, dotted or not, showing end pins or not…
And while I’m writing this I’m certain that this must be already on your minds.
Thank you for a great looking program with awesome playback capabilities. I’m very excited as we all are about what the future holds. Now for the reason for my post, I’m tired of using one program or another for something the other lacks. I use Finale, Sibelius, Guitar Pro and Chord wizard among other programs through the years and would like to see features like these below in future releases of Dorico for us Fretted instrument players. I know it is a long list and most of it has already been brought up but here is my thoughts just in case.
All of the below with altered tuning on the selected instrument ability.
Guitar fretboard diagram with the ability to select notes into the score and shows notes in playback
Keyboard with the same as the fretboard ability above
Ideas functionality from Sibelius
Other fretted instruments tabs
Chord dictionary with chord diagrams above the staff
Chord progression generator or guide similar to Cubase maybe
Ability to add chords to holding pin that are part of the score and can be dragged in and out.
The abilty to display and change chord diagrams from the chord symbol to the roman numeral or Nashville and other types of chord progression shorthand.
Scales functionality where it will display scale you pick in the selected tuning and show the scale on the fretboard diagram so we can import them into the staff or tab. Also, be able to load the full fretboard diagram or scales in certain positions on the fretboard. Maybe a way to align it with the selected chords on the staff for easy visibility on in key options based on the underlying chord progressions.
Ability to move music from staff to tab and back with the ability to specify the fret low and high ranges.
Integration/synchronization with CUBASE via rewire or something else. Until then give us a stereo audio track in Dorico to import to and sync with the score.
I know you guys can even best all of that and I understand it all takes time especially to get it right but please give us at least the tab and chord diagrams and audio track or Cubase sync ASAP as now you have a better marketing channel for recording guitarists being tied to Steinberg/Cubase!!!
Welcome to the forum!
Did you read this thread from the beginning?
The guitarists among us are all more or less impatiently waiting for the guitar features to be released, and it has been made clear in several posts that this won’t happen in 2018, but is likely to happen in the next major release. Concerning alternate tunings and “other fretted instruments tab”, this has been mentioned in one of Daniel’s posts above in this thread and is in the making. As for the “idea functionality”, several users simply create an “ideas flow” and deactivate it so it’s not displayed in the layout(s).
What I would like to add to the wishlist are capo chords in addition to sounding chords. One lane or mark up would be showing the chord position symbol, the other one shows the chord symbol of the chord that is actually sounding, e.g. capo 5 E position corresponds to A major chord. To differentiate, allow each “chord type” to be adjusted to taste: color, typeface, mark up etc
Let the user decide how he wants them to be displayed, e.g. one above the other or one behind the other.
Further, I’d love to have a configurable fretboard graphic!
Following some suggestions how to configure the graphic itself:
– Number of strings
– Entire fretboard to the soundhole/the end of the neck with configurable number of frets/partial frets (when frets reach round the sound hole)
– Number of frets when displaying only a fraction of the neck; “open neck” graphics
– Several heads from electric (Stratocaster type) via classical to acoustic – or without any head, just the saddle
Once the graphic itself is configured, it can be used to show
– roots depending on the scale family
– comparative positions
Each of them is configurable and would probably come predefined as round, filled dots for notes of a scale and rectangles for the roots, e.g., but remain modifiable by the user.
I’m not planning to create an iBook with the help of Dorico, so I don’t need them to be interactive and play actual notes when you click a dot (but hey – why not! Give it a thought). I’m interested to be able to not have to use Illustrator and the likes to create educational graphics.
@Daniel, out of sheer curiosity:
Do I perceive a hint that you are planning to realize saz, oud (well, no frets) – say: oriental instruments and makamat??
Still learning to use the software. The time is well invested. I prefer to know the software before being stunned by another myriad of new functions and possibilities. It’s like growing with the software…
This is my first post on the Dorico/Steinberg forum.
I’m looking forward to trying Dorico and providing feedback to the development team.
Tablature notation is essential to my teaching and publishing so I won’t be able to seriously use Dorico until tablature features are in reasonably full bloom. Nevertheless, with development on the horizon or just starting, I suppose it’s a good time to voice my needs and hopes.
Tab staff entry
For simple tablature projects I generally I record in real-time onto a treble clef … and generate tablature from that notation.
• For complex tablature projects (and up-the-neck material) I like the option of entering tablature numbers directly on the tablature staff—as we can in Sibelius, and Guitar Pro—and generate standard clef notation from the tablature.
Main reason: One can always accurately generate clef notation from tablature. But going the other way round one must engage the tedious task of setting the correct string assignments. Subsequently, if edits are not synchronized (between tab and clef) and if changes must be made in clef notation only, then new tablature must be generated after every edit. At such a juncture there are two options: again hand edit the string assignments, or rely on software that intelligently looks at strings assignments before generating tablature and tries to preserve them. Otherwise, regarding string assignements, it’s like starting the measure or phrase anew.
• I need the option of flat beams outside the staff, above or below.
• Independent beaming rules and the option to manually make beaming differ from the clef notation.
• Scordatura is “standard” notation that depicts the finger placement on a retuned instrument. Thus tablature from scordatua will display correctly, but playback from the scordatura staff will be off pitch for notes that pertain to retuned strings. There should be some mechanism to account for this descrepancy and playback the tablature with the correct pitches. I haven’t seen this feature anywhere.
Partial capoing techniques have become quite popular over the last 20 years or so. They provide a way of emulating open tunings … but without returning! There’s no consensus on how to address open uncapoed strings and open partial capoed strings, so that’s a big issue. And with partial capo notation there’s a playback concern roughly parallel to that of scordatura.
I’ve written an in depth article on partial capo here
And I’ve created Sound Thinking, an interactive fingerboard encyclopedia that supports partial capo. (Note that it requires that you have FlashPlayer installed and allow it to run.) Clicking this link will open Sound Thinking to a “scene” that compares Partial DADGAD (355533) to true DADGAD capoed 555555
More info on Sound Thinking scenes here.
Looking forward to developments!
Thanks for your list of requirements, scorster. We’re not yet working on guitar notation, but it’s definitely something we expect to be working on soon, so this is helpful. You’ll be glad to know that things like partial capo and handling of instruments with non-chromatic fingerboards are already in our plans.
Beg your pardon for writing in German.
Zu meiner Enttäuschung über das fortdauernde Fehlen von Tablatur, Akkorddiagrammen kam zuletzt das ungläubige Staunen über das Produkt-, Upgrademanagement des Steinberg Teams.
Wie so vielen anderen Käufern der ersten Stunde war mir das Team um Daniel, ihr Ansatz sehr sympathisch.
Alle hatten letztlich die Hoffnung, dass es im Laufe der Zeit nach und nach Verbesserungen geben würde.
Und dies ist ja auch eindrucksvoll geschehen.
Es wurde dem Nutzer/ Käufer mit Dorico ein vollwertiges Notenschreibprogramm mit allen zukünftigen Updates versprochen.
Nun wird ein neues kostenpflichtiges Produkt platziert, das die Arbeitskraft der Entwickler derart in Beschlag nehmen musste, dass die Wünsche und Bedürfnisse der ersten Nutzer( ua Tabulatur Griffdiagramme) bis in das Jahr 2019 hinein , beiseite geschoben wurden.
Mit Verlaub, das geht mir gegen den Strich, um nicht ausfallend zu werden.
Neue Kunden gewinnt man so nicht, von den Heerscharen professioneller Filmmusikschaffenden einmal abgesehen.
Den Lehrer, der Unterrichtsmaterial für seine Schüler kreieren will, schreckt man damit ab, und nimmt billigend in Kauf,
dass er zu den alteingesessenen Platzhirschen finnischer Herkunft wechselt.
So , das musste ich mal loswerden.
I need guitar chord diagrams now. I am trying to make a clean break from Sibelius to Dorico. Together with my associates André van Haren and Anthony Moran, we are publishing original hymns and psalms at insong.org and topcatholicsong.com. We are using both standard guitar chords and solfege (do-re-mi) chords. Please make guitar chord diagrams a top “numero uno” priority. You have many praise and worship musicians out here in the world awaiting.
Would like to see a supirior tab-notation solution in Dorico in the near future. This is the last feature left I need to completly switch to Dorico
To be clear: we have not announced anything about the timescale for a Dorico “3” or what features it might contain, so this is just Eddo’s own speculation.
We know how important guitar notation is, but we are also committed to doing it properly, and so at this stage we cannot provide a specific estimate for when you will see it.
I’m so pleased now with Dorico, after a year of semi-frustration, and my annoying complaining, now I’m in love. Making beautiful scores in it. Well done to the team. Thank you.
I as well still need to have Sibelius on my desk, and cant switch fully to Dorico because of the chord diagram option ( I think it’s the final holdout!).
For educational purposes, which I write alot of, it is essential. Also, when the chord diagram boxes come in, it would be great if they wouldn’t be limited to one finger per string, as I think Sibelius did in an early release. These boxes are used by us guitarists not only for chords, but for scale positions as well. It is essential that we can put multiple fingerings in these boxes, on the same string.
Another, less essential feature, but one that would surely grab a small but dedicated slice of the market, is the option for different symbols on the strings. The late, great guitarist and teacher, Ted Greene, used to use different symbols in his chord charts to indicate a possible different fingering, or a melodic move inside a harmonic context. Usually it was ‘o’ and ‘x’ that he would add in, to indicate the next place to put your finger.
He usually wrote it out by hand, but here is someone’s transcription of it in notation software: https://www.tedgreene.com/images/lessons/arrangements/MyFunnyValentine_TedGreeneArrangement_1974-12-18.pdf
Doesn’t necessarily need to be Xs and Os, but some symbols of showing where to put the finger next. numbers would also be great, but might get confusing as it might get mixed up with fingering and/or scale degree or chord tone.
Thanks for everything!
Thanks for these examples of chord diagrams with additional symbols to show alternative fingerings. We’ll bear this in mind!
Is there an update on exactly when tablature will be available in Dorico? I give private music lessons, and about half of my students play guitar and bass. I’m currently using Noteflight, Guitar Pro and Overture 5 (which feels like a beta test). With tablature and chord diagrams, I’d switch to Dorico without a second thought!
It won’t be before v3, and there’s no specific release date for v3 (2.2.10 only came out 48 hours ago). Even then, no promises have been made re: v3.0.
I’m only a hobbyist guitarist but I’d like to add, whether it will be considered to provide support for import of native Guitar Pro project files, like MuseScore does…? Just curious…
The Guitar Pro file format is published. On the basis of a quick look, it’s organized in a similar way to MusicXML.
But apparently Guitar Pro 5 has MusicXML output as well, which makes writing a converter app rather pointless (unless the Guitar Pro XML export is buggy - I don’t know anything about the software)
In any case, apparently there already is a free converter from Guitar Pro to MusicXML - it’s called MuseScore!
In the longer term, when the Dorico plugin capability gets up and running, this sort of file importer would probably be a good non-trivial use for it. If you put this sort of function directly into an application, you could get “locked in” to keeping Dorico updates in step with Guitar Pro updates or losing the functionality when the two get out of sync with each other, whereas plugins can be updated on their own separate release schedule.
Ok - thanks Rob. Interesting; hadn’t thought of it like that (Dorico getting ‘locked in’ etc…).
Will keep an occasional eye on how things progress here.