# Key command for 'Edit instrument channel settings' ?

**URL:** <https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594>\
**Category:** Cubase\
**Tags:** cubase-8\
**Created:** [March 20, 2016, 8:45pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594 "2016-03-20T20:45:45Z")\
**Posts on this page:** 16\
**Page:** 2

<div class="post-metadata">

**Author:** ![luga01](https://avatars.discourse-cdn.com/v4/letter/l/7feea3/32.png) [@luga01](https://forums.steinberg.net/u/luga01)\
**Post date:** [May 25, 2018, 7:52am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/21 "2018-05-25T07:52:44Z")

</div>

Dylan is talking about the output shown below the fader (not the actual output in the tab). This is shown incorrectly after the project has been shut down and reopened. The macro I created to allow a key press to emulate the ‘Edit Instrument Channel settings’ button relies on this being correct.

It always defaults to the master output.

When you click ‘Edit Instrument Channel Settings’…

![](http://i65.tinypic.com/16iek9d.jpg)

It shows the correct output at the fader

![](http://i66.tinypic.com/27yqzh0.jpg)

But if you use the Edit Channel Settings (which we have to use for the macro to work)…

![](http://i63.tinypic.com/a41kbs.jpg)

then it shows the incorrect output channel

![](http://i63.tinypic.com/122ep8n.jpg)  
  
  
If only Steinberg would give us ‘Edit Instrument Channel Settings’ in the Key Commands menu this would all go away and I wouldn’t have to create a macro which relies on the Edit Channel Settings showing the correct output at the fader.

---

<div class="post-metadata">

**Author:** ![audioorange](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@audioorange](https://forums.steinberg.net/u/audioorange)\
**Post date:** [August 21, 2018, 8:41pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/22 "2018-08-21T20:41:08Z")

</div>

I waiting for this key command (also in Generic remote) over 10 years !!!

---

<div class="post-metadata">

**Author:** ![Pablo1980](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/pablo1980/32/92039_2.png) [@Pablo1980](https://forums.steinberg.net/u/Pablo1980)\
**Post date:** [October 8, 2018, 11:08am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/23 "2018-10-08T11:08:24Z")

</div>

Yes! Please Steinberg, we need this key command…should not be so difficult to implement?

---

<div class="post-metadata">

**Author:** ![Pablo1980](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/pablo1980/32/92039_2.png) [@Pablo1980](https://forums.steinberg.net/u/Pablo1980)\
**Post date:** [October 8, 2018, 2:42pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/24 "2018-10-08T14:42:15Z")

</div>

> [@luga01](#):
>
> Hello, sorry, I haven’t been monitoring this post for some time.
> 
> The first part of the macro opens the default ‘edit channel settings’ window (the one we don’t want to see every time)  
> Then you have to add ‘Focus - Forward’ _exactly_ 25 times. This moves the focus to highlight the ‘E’ button on the channel which will open the instrument channel settings instead.  
> Lastly add ‘Focus - Confirm’ which effectively selects the ‘E’ button.
> 
> Save the macro and bind it to a keypress.
> 
> One very important point is that you must have the ‘Show Output Chain’ button highlighted at the top of the edit settings window for this to work. If the first time you use this macro it seems like it’s still opening the old ‘edit channel settings’ window then highlight the button just mentioned then the macro will work properly forever more!
> 
> ![](https://s14.postimg.cc/5a91sthb5/Cubase.jpg)
> 
> The macro is as follows…
> 
> Edit- Edit Channel Settings  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Forward  
> Focus - Confirm
> 
> Hope this helps someone. Russ

Is it imposible to make it work without showing the output section of the editor?  
Nice workaround though!!!

---

<div class="post-metadata">

**Author:** ![audioorange](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@audioorange](https://forums.steinberg.net/u/audioorange)\
**Post date:** [December 16, 2018, 10:29pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/25 "2018-12-16T22:29:46Z")

</div>

I waiting for this commad too over 10 years. One of the most important for me

---

<div class="post-metadata">

**Author:** ![audioorange](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@audioorange](https://forums.steinberg.net/u/audioorange)\
**Post date:** [January 16, 2019, 10:33am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/26 "2019-01-16T10:33:21Z")

</div>

+1

---

<div class="post-metadata">

**Author:** ![Pablo1980](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/pablo1980/32/92039_2.png) [@Pablo1980](https://forums.steinberg.net/u/Pablo1980)\
**Post date:** [January 16, 2019, 1:31pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/27 "2019-01-16T13:31:07Z")

</div>

Is there a way to get some steinberg employee to see this? I don´t think that a simple keycommand could be so difficult to implement, after so much time!

---

<div class="post-metadata">

**Author:** ![audioorange](https://avatars.discourse-cdn.com/v4/letter/a/91b2a8/32.png) [@audioorange](https://forums.steinberg.net/u/audioorange)\
**Post date:** [January 28, 2019, 5:32pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/28 "2019-01-28T17:32:36Z")

</div>

+1

---

<div class="post-metadata">

**Author:** ![Bharathj63](https://avatars.discourse-cdn.com/v4/letter/b/b2d939/32.png) [@Bharathj63](https://forums.steinberg.net/u/Bharathj63)\
**Post date:** [August 14, 2020, 3:50am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/29 "2020-08-14T03:50:42Z")

</div>

This should be implimented as I mostly wor k with rack instruments. Also if VSL is being used the edit on the midi channel has to openup it’s corresponding audio return track. It’s obvious. No one what’s to fiddle around with a midi channel settings atleast on a daily basis. Please stienberg, fix this and make our life’s easier!

---

<div class="post-metadata">

**Author:** ![Pablo1980](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/pablo1980/32/92039_2.png) [@Pablo1980](https://forums.steinberg.net/u/Pablo1980)\
**Post date:** [August 16, 2020, 8:41pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/30 "2020-08-16T20:41:04Z")

</div>

Yes, this should be done in Cubase 11, I floated the idea to Matthias and he seemed rececptive, I hope it isn´t too hard to implement, It would make my life soooo much easer.

---

<div class="post-metadata">

**Author:** ![SoundOf](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/soundof/32/92363_2.png) [@SoundOf](https://forums.steinberg.net/u/SoundOf)\
**Post date:** [March 19, 2021, 7:26pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/31 "2021-03-19T19:26:19Z")

</div>

Yes, I hope it happens too! Most modern CPU’s can handle Kontakt/Omnisphere with multiple channels, and for the MIDI edit to take you to the MIDI channel when I want it to be audio is annoying!

---

<div class="post-metadata">

**Author:** ![HONEYHILL](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/honeyhill/32/132420_2.png) [@HONEYHILL](https://forums.steinberg.net/u/HONEYHILL)\
**Post date:** [April 6, 2022, 9:25am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/32 "2022-04-06T09:25:23Z")

</div>

+1 still not available in Cubase 12. 🙄

---

<div class="post-metadata">

**Author:** ![Freddy](https://avatars.discourse-cdn.com/v4/letter/f/3d9bf3/32.png) [@Freddy](https://forums.steinberg.net/u/Freddy)\
**Post date:** [May 28, 2022, 12:32am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/33 "2022-05-28T00:32:28Z")

</div>

+1 Pretty please with a cherry on top!

---

<div class="post-metadata">

**Author:** ![mushroomtoeat](https://avatars.discourse-cdn.com/v4/letter/m/8e8cbc/32.png) [@mushroomtoeat](https://forums.steinberg.net/u/mushroomtoeat)\
**Post date:** [December 21, 2022, 1:24am UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/34 "2022-12-21T01:24:37Z")

</div>

This will do the trick 🙂

[![](https://img.youtube.com/vi/Bo51qu_YmIo/maxresdefault.jpg "Cubase Tip: Open VST instrument with a key command") ](https://www.youtube.com/watch?v=Bo51qu_YmIo)

---

<div class="post-metadata">

**Author:** ![redconfetti](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/redconfetti/32/166457_2.png) [@redconfetti](https://forums.steinberg.net/u/redconfetti)\
**Post date:** [May 6, 2023, 4:10pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/35 "2023-05-06T16:10:50Z")

</div>

In Cubase 12 a default key command is not mapped, but you can map a key command to it as “Edit VST Instrument”. The “Edit Channel Settings” option is also available to map. In this screen shot I’ve mapped the period (.) and forward slash (/) keys respectively.

 ![image](https://europe1.discourse-cdn.com/steinberg/original/3X/5/6/5610c4445fd70a4366b02ef90b6485ca8e7704d1.jpeg)

---

<div class="post-metadata">

**Author:** ![Johnny\_Moneto](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/johnny_moneto/32/329861_2.png) [@Johnny\_Moneto](https://forums.steinberg.net/u/Johnny_Moneto)\
**Post date:** [May 6, 2023, 8:23pm UTC](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594/36 "2023-05-06T20:23:24Z")

</div>

I was amazed that the video creator did not also close the instrument editor via the key command.

[Previous page](https://forums.steinberg.net/t/key-command-for-edit-instrument-channel-settings/660594.md?page=1)
