# Limiters gets bypassed after project reloaded

**URL:** <https://forums.steinberg.net/t/limiters-gets-bypassed-after-project-reloaded/1044157>\
**Category:** Cubasis\
**Created:** [October 23, 2026, 9:23am UTC](https://forums.steinberg.net/t/limiters-gets-bypassed-after-project-reloaded/1044157 "2026-10-23T09:23:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![VonM3](https://avatars.discourse-cdn.com/v4/letter/v/c67d28/32.png) [@VonM3](https://forums.steinberg.net/u/VonM3)\
**Post date:** [October 23, 2026, 9:23am UTC](https://forums.steinberg.net/t/limiters-gets-bypassed-after-project-reloaded/1044157/1 "2026-10-23T09:23:46Z")

</div>

![IMG_0458](https://europe1.discourse-cdn.com/steinberg/original/4X/c/1/1/c115de3074e34aa17f82c82ea08a2a908e42ba29.png)

Waves L1+ and Drambo has the same problem.

Version: 3.8.6

Removing the original one then load a new one temporarily solves the problem.

It seems that the gain slider still works while real time playing, but mixing down fully bypasses it.

---

<div class="post-metadata">

**Author:** ![LSlowak](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/lslowak/32/2_2.png) [@LSlowak](https://forums.steinberg.net/u/LSlowak)\
**Post date:** [November 4, 2026, 11:38am UTC](https://forums.steinberg.net/t/limiters-gets-bypassed-after-project-reloaded/1044157/2 "2026-11-04T11:38:22Z")

</div>

Hi @VonM3,

We are currently unable to reproduce the issue on our end.

It would be great if you could share the project with us. Please refer to my private message so we can continue investigating the issue together.

Best,  
Lars

---

<div class="post-metadata">

**Author:** ![VonM3](https://avatars.discourse-cdn.com/v4/letter/v/c67d28/32.png) [@VonM3](https://forums.steinberg.net/u/VonM3)\
**Post date:** [November 4, 2026, 2:42pm UTC](https://forums.steinberg.net/t/limiters-gets-bypassed-after-project-reloaded/1044157/3 "2026-11-04T14:42:58Z")

</div>

I tried to reproduce the problem and it turns out that it’s a complicated issue involving pro-c 2, and this is a simple way to reproduce it:

1. Create a new project
2. Write a note on piano roll
3. Load a limiter on master
4. Load a pro-c 2 and set make-up high
5. Reload the project
6. Play the project

Then you may see the peak of the master goes red.

Thank you for following up.
