# Routing editor

**URL:** <https://forums.steinberg.net/t/routing-editor/629003>\
**Category:** Nuendo\
**Tags:** nuendo-older-version\
**Created:** [May 28, 2013, 3:53am UTC](https://forums.steinberg.net/t/routing-editor/629003 "2013-05-28T03:53:42Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Emenelton](https://avatars.discourse-cdn.com/v4/letter/e/cdc98d/32.png) [@Emenelton](https://forums.steinberg.net/u/Emenelton)\
**Post date:** [May 28, 2013, 3:53am UTC](https://forums.steinberg.net/t/routing-editor/629003/1 "2013-05-28T03:53:42Z")

</div>

I am trying to use routing editor to flip channel two to three in a four channel group to correct a routing issue with a vst plug. I have gotten to the input routing with the four lines and four squares with the grey field between them, but the settings are unresponsive. I am hoping for some guidance.

---

<div class="post-metadata">

**Author:** ![neilwilkes](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/neilwilkes/32/200970_2.png) [@neilwilkes](https://forums.steinberg.net/u/neilwilkes)\
**Post date:** [May 28, 2013, 6:43pm UTC](https://forums.steinberg.net/t/routing-editor/629003/2 "2013-05-28T18:43:52Z")

</div>

Trying to understand the problem here & struggling.  
Can you please describe the problem?

---

<div class="post-metadata">

**Author:** ![Emenelton](https://avatars.discourse-cdn.com/v4/letter/e/cdc98d/32.png) [@Emenelton](https://forums.steinberg.net/u/Emenelton)\
**Post date:** [May 28, 2013, 7:53pm UTC](https://forums.steinberg.net/t/routing-editor/629003/3 "2013-05-28T19:53:45Z")

</div>

I am using a plug-in that accepts a mono analog signal on it’s input number ‘1’. That plug outputs a four channel signal, unfortunately it’s channel 2 and channel 3 need to be exchanged before the 4 channel signal hits the decoder.

1\>1  
2\>3  
3\>2  
4\>4

I am trying to use channel routing but it is only active when a plugin is inserted and it seems to only accommodate one cross routing element. I need to cross route 2 to 3 and 3 to 2.

I have an audio channel playing a mono signal with the VST Plug insert, that generates a 4 channel output. I need to send that to a group channel and along the way convert track 2 to 3 and 3 to 2.

---

<div class="post-metadata">

**Author:** ![Fredo](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/fredo/32/6_2.png) [@Fredo](https://forums.steinberg.net/u/Fredo)\
**Post date:** [May 29, 2013, 7:08am UTC](https://forums.steinberg.net/t/routing-editor/629003/4 "2013-05-29T07:08:23Z")

</div>

Use the Mixer Delay plugin to change channel routing.

Fredo

---

<div class="post-metadata">

**Author:** ![Emenelton](https://avatars.discourse-cdn.com/v4/letter/e/cdc98d/32.png) [@Emenelton](https://forums.steinberg.net/u/Emenelton)\
**Post date:** [May 29, 2013, 6:37pm UTC](https://forums.steinberg.net/t/routing-editor/629003/5 "2013-05-29T18:37:18Z")

</div>

Fredo,

Thank-you, I also discovered the standard panner and how to choose it. It seems that the panners were interfering with straight channel routing between tracks and groups.

Chris