[SOLVED] Pre in mixConsole not showing up

Cubase
1

  1. In the mix Console, the Filter Chanel type, the pre do not show up anymore.



    In the manual, p.323, I don’t know what they are talking about…

  2. The changed settings are visible in the curve display. (what curve?)

  3. If you deactivate the high-cut and low-cut filters, the filter curves are removed from the display. (What display)

  4. Bypassed high-cut and low-cut filters are displayed in a different color. (How do I bypass them? What color they have when active?)

2

Display must mean the eq analyzer.

the hpf and lpf are to the left and under that is the pre gain for the channel. You can also find it in the mixer view if you have the racks open. When you have the lpf or hpf cutting a freq, but decide to bypass it, it then becomes a different shade allowing you to see it in the analyzer still. there is a clickable button above the section that can bypass it or yu can bypass the entire eq.

3

Ok I got most of it. About the
Bypassed high-cut and low-cut filters are displayed in a different color.

How do I bypass the HCF and LCF, is it clicking the dot. It change from Yellow - dark blue - light blue/white.
Thanks

4

yes, that should be it and also above the hpf lpf section is a button to turn on off…

5

Ok yellow = bypasses, blue = at least activated, white = nothing activated.