Yes, all HALion generations since HALion 4 share the same plugin ID. This way the plugin of each generation can just be replaced with the latest generation and full project compatibility in DAWs is garanteed. It would be interesting to know what causes the issue in VEP.
I’m going to update to VEP 6 to see if there is any difference.
(still didn’t get “back” my H5 license)
I understand it.
Thank you so much for your support.
No difference with VE Pro 6.
I posted on their forum. We’ll see if anybody has a suggestion on that.
If VEP uses the dll name instead of the internal plugin ID you could try renaming the halion 6 dll to the name of the halion 5 dll. This should make no difference to cubase and might save you from VEP problems.
Hope this helps.
I tried. Unfortunately HALion disappears from VEP when I change the name of the dll (dll + srf). Maybe there are other files to modify somewhere else.
Still no response regarding H5 license. I’m still stuck.
That should not happen. Be sure to get the right dll (see in the Vep setup what folder it is scanning) and don’t change any other names as that will probably break halion. The dll has a different name but is still halion 6. Maybe after only setting the right halion to 5 force a rescan. And it must be the exact name halion 5 had when it was used by VEP.
Actually it doesn’t work with VEP 6.
I uninstalled version 6, and now VEP 5 recognizes H6 as H5 when I change its name.
Now, individually saved channel sets load with H6.
BUT, my existing VEP project (Metaframe), and this is the most important, still doesn’t load previously created channel sets, using the newly renamed H5.
PS : I renamed HALion 6.dll to HALion 5.dll
Ah to bad!
Hope it gets sorted
I got Halion 5 with HyperSonic 2. On my eLicenser it show’s that I have a Halion 5 license.
So I am a bit confused. Edited:
Nevermind! I just read this-
Is HALion Sonic 3 included in HALion 6?
Yes, the plug-in and the library are completely included in HALion 6 and covered by the HALion 6 license.
Does anyone know, if its possible
to install Halion 6 upgrade in same library
as Halion 4-5 library, without loosing Halion 4-5
I would just like to know, because
i have my halion 4-5 library contents installed on my ssd, i want to keep both
Halion 4-5 and 6.
I don’t care if Halion 6 overwrite my
Halion 5 license on my usb elicenser,
execpt that i want to keep all
I did’nt buy Halion 6 upgrade yet!.
I lost Hypersonic 2 on both licenses as I upgraded to Halion 6.
there is no support center in Jordan were I live.
how to contact the support team to get 2 HALion 5 Add-On licenses?
Please log into your MySteinberg account and open a support ticket.
I did 9 days ago and until now no answer
if I buy a new halion 5 edu, does it get updated to V6 EDU free ?
This is ridiculous. One gets the advice to open a ticket. But nothing happens with that ticket until one starts complaining here.
I have also opened a ticket and heard nothing after the automated reply.
Please sent me a PM with your ticket numbers and I’ll talk to the support team.
I was about to get the HS 5 to HS 6 upgrade. From reading the discussion here I take it that up"grading" actually sets you back in regards that one can’t easily use HS 5 besides HS 6. One has to remove HS 6 and “reinstall” HS 5 to get older projects working. Unless this issue has been solved i think i will have to pass on HS 6 for now, too much time consuming hassles in my case … F
No, H6 is compatible with H5 projects. All the content packs of previous versions are still there, and work the same way as before. You can even download and use true legacy HALion content in the old formats (from the ftp site) if needed, and use that in H6. You simply get new content, better stability, and a long list of new features/abilities.
It should not be a problem unless you need to use a 32bit host, or run on a really old OS such as Windows XP. That should be the only reason you’d need to downgrade to older HALion versions. If this is you…then you’d simply apply for a legacy ‘add-on key’ for your dongle.
I can load all my old Cubase 7 and 8 projects (even if they were made with 32bit versions) that were made with HALion 4 and 5 in my existing Cubase 9/HALion 6/Windows 10x64 or Mac setups without issue. All the old content packs stay with me…all the old fxb plugin set-up information kept in older daw projects still work, etc.
I can still load old Sibelius 7.5 - 8.x projects that I made with HALion 5. Because the plugin id is the same…Sibelius doesn’t know the difference…H6 loads where H5 did before. It loads the project and parses my default HALion setup as it always did. I just double Check HALion to make sure it has the program table and other settings I want (I store these as multi-presets), and keep right on working as before.
All my old 64bit Bidule setups that I created with H5 still work with H6 as they did before.
I can NOT get HALion 6 to work with Finale 2012 and Sibelius 6 on my old 32bit Windows XP laptop. In this case, I simply apply for an H5 add-on key for my Steinberg dongle, and roll back to whatever 32bit version of HALion works best for my old XP Laptop.
So…unless you need to roll back to support a 32bit Host or and old OS etc…you just use H6…even with your ‘old projects’ that may have been made using previous versions of HALion.
Occasionally I fire up an old 32bit DAW or sequencer on my 64bit Windows 10 system. Rather than uninstall H6 and roll back, I just use a virtual MIDI loopback port, reroute audio through the DAW, and run HALion in stand alone mode (or better yet, host it in Bidule and use rewire and reastream).
Really great that there is an update for Halion 6. Also it fixed my issue for Halion 6 in a Very Small Window not Sizeable. I hope that does not happen again, it was unworkable.
My question is, Why does Halion 6 or Steinberg Update software does not see or warm about this update to me as a user. It also happened with Wavelab 9 pro Update last time. I have to find out there is an update for Steinberg software available myself each time by looking at the support site or forum here ? If i log into my steinberg account no warmings about updates. If i use Wavelab 9 , halion 6 or C9pro, no warnings about new updates…
Is it really so every users must find out themselves by going to support or the forum to look themselves for updates ?