# Upgraded system, still experiencing latency

**URL:** <https://forums.steinberg.net/t/upgraded-system-still-experiencing-latency/720226>\
**Category:** Cubase\
**Tags:** issue, cubase-10-5\
**Created:** [May 21, 2021, 10:02pm UTC](https://forums.steinberg.net/t/upgraded-system-still-experiencing-latency/720226 "2021-05-21T22:02:00Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![markbmullins](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/markbmullins/32/131782_2.png) [@markbmullins](https://forums.steinberg.net/u/markbmullins)\
**Post date:** [May 21, 2021, 10:02pm UTC](https://forums.steinberg.net/t/upgraded-system-still-experiencing-latency/720226/1 "2021-05-21T22:02:00Z")

</div>

I recently upgraded my PC so that I can live stream my electronic drum kit. Current specs are i9 10850k, 64 GB ram, and Cubase 10.5 is on a m.2 SSD. I am currently setting up GetGood Drums Modern and Massive pack through Kontakt so that I can sample my kit while I stream. MIDI is sent directly out of the drum module into Cubase/Kontakt. I am monitoring through my Schiit Modi 3 output using “Generic Low Latency Audio Driver.”

When I set a buffer size of 10ms, there is still some perceptible delay, and tons of crackling. At 12ms, the crackling goes away but some sounds are still dropped if I play fast. At 50ms, no sounds are dropped but there is a large delay. At this point, I am not streaming or running OBS, and my CPU utilization has never gone above 14%.

Is it possible to reduce my latency enough to monitor the output live without crackling?

---

<div class="post-metadata">

**Author:** ![Kristijan](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/kristijan/32/123809_2.png) [@Kristijan](https://forums.steinberg.net/u/Kristijan)\
**Post date:** [May 22, 2021, 4:32am UTC](https://forums.steinberg.net/t/upgraded-system-still-experiencing-latency/720226/2 "2021-05-22T04:32:32Z")

</div>

Hi,

Instead of "Generic Low Latency Audio Driver” use “ASIO” or “ASIO4ALL” driver and u should be fine

---

<div class="post-metadata">

**Author:** ![peakae](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/peakae/32/651_2.png) [@peakae](https://forums.steinberg.net/u/peakae)\
**Post date:** [May 22, 2021, 7:08am UTC](https://forums.steinberg.net/t/upgraded-system-still-experiencing-latency/720226/3 "2021-05-22T07:08:14Z")

</div>

Can I just say, using a soundcard with a native ASIO driver, would make a world of difference.  
Something like a RME audio-device, even if USB connected would do the job. The tolerated latency for working with audio is usually around 5-6ms for most. Anything more is going to be annoying, but of cause we are all build different, so it depends on how sensitive You are.
