# Urgent: Undo accidental change to empty volume automation curves!

**URL:** <https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334>\
**Category:** Cubase\
**Tags:** cubase-10, issue\
**Created:** [February 29, 2020, 12:07am UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334 "2020-02-29T00:07:23Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![tonyreign](https://avatars.discourse-cdn.com/v4/letter/t/d07c76/32.png) [@tonyreign](https://forums.steinberg.net/u/tonyreign)\
**Post date:** [February 29, 2020, 12:07am UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/1 "2020-02-29T00:07:23Z")

</div>

Hi,

We absolutely need this … I, for myself, keep accidentally hitting group, FX, or other type of channels’ volume automation curve which are empty (no points), and this creates a point and changes the volume settings of the channel accidentally without any way to revert back to what it was… My memory being what it is (like most of us), I cannot recall all channel volume settings by heart!

This issue causes a lot of wasted time to reajust these channels’ levels and is pretty much a non-sense that it is not recorded in the activity history for Undo/Redo at this time…

This is an URGENT request to add this feature → UNDO to previous value accidentally drawn point on empty automation curve (volume usually). Now it doesn’t UNDO it to previous level, just removes the point, so you could miss value adjusted for hours). Neither in global undo nor in mixer undo at this time.

Thank you so much,

---

<div class="post-metadata">

**Author:** ![Martin.Jirsak](https://avatars.discourse-cdn.com/v4/letter/m/85f322/32.png) [@Martin.Jirsak](https://forums.steinberg.net/u/Martin.Jirsak)\
**Post date:** [February 29, 2020, 6:19pm UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/2 "2020-02-29T18:19:06Z")

</div>

Hi,

You can undo it in the MixConsole History, or am I wrong?

Btw, Feature Request posts fit to the Feature Request thread.

---

<div class="post-metadata">

**Author:** ![Savagery](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@Savagery](https://forums.steinberg.net/u/Savagery)\
**Post date:** [March 3, 2020, 5:12am UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/3 "2020-03-03T05:12:43Z")

</div>

Good luck with this one, I somehow doubt we’ll see a fix. This has caused me so many headaches, seems like such a basic usability improvement. I have gotten used to just locking tracks so I don’t accidentally change the volume.

---

<div class="post-metadata">

**Author:** ![delta](https://avatars.discourse-cdn.com/v4/letter/d/898d66/32.png) [@delta](https://forums.steinberg.net/u/delta)\
**Post date:** [March 3, 2020, 3:34pm UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/4 "2020-03-03T15:34:08Z")

</div>

[CTRL] - Z ??

Delta

---

<div class="post-metadata">

**Author:** ![Savagery](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@Savagery](https://forums.steinberg.net/u/Savagery)\
**Post date:** [March 3, 2020, 4:38pm UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/5 "2020-03-03T16:38:46Z")

</div>

> [@delta](#):
>
> [CTRL] - Z ??
> 
> Delta

One would think, but no. The node is removed but the volume is not restored. Mixer undo doesn’t work either.

---

<div class="post-metadata">

**Author:** ![tonyreign](https://avatars.discourse-cdn.com/v4/letter/t/d07c76/32.png) [@tonyreign](https://forums.steinberg.net/u/tonyreign)\
**Post date:** [April 10, 2020, 1:42pm UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/6 "2020-04-10T13:42:10Z")

</div>

Still an issue on 10.5.12 here ☹

---

<div class="post-metadata">

**Author:** ![julian\_schwbrt](https://avatars.discourse-cdn.com/v4/letter/j/ee59a6/32.png) [@julian\_schwbrt](https://forums.steinberg.net/u/julian_schwbrt)\
**Post date:** [September 9, 2023, 9:13pm UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/7 "2023-09-09T21:13:58Z")

</div>

+1! 12.0.70 Still an Issue!

---

<div class="post-metadata">

**Author:** ![Timo00](https://dub1.discourse-cdn.com/steinberg/user_avatar/forums.steinberg.net/timo00/32/199903_2.png) [@Timo00](https://forums.steinberg.net/u/Timo00)\
**Post date:** [September 11, 2023, 3:13am UTC](https://forums.steinberg.net/t/urgent-undo-accidental-change-to-empty-volume-automation-curves/143334/8 "2023-09-11T03:13:32Z")

</div>

Yeah, this is such a safety issue, and I really hope this gets fixed. Until then, I’ve gotten in the habit of locking my tracks as soon as possible.
