Auto Select Controllers |
|
Activates/Deactivates Auto Select Controllers. When active, selecting a MIDI event (note), will select all Controllers under it. |
5 |
Auto Select Controllers |
Bounce MIDI |
|
This command will bounce the selected midi parts into one. |
8 |
Bouncing MIDI Parts |
Controller Lane Setup 1-16 |
|
Recalls Controller Lane Presets 1-16. Note: You need to have presets saved, otherwise it won’t work.
|
8 |
Controller Lane Setup Menu |
Delete Continuous Controllers |
|
Make a selection of parts. Give the command. Observe how all CCs have been deleted. Also works with range selections. Any part caught in the range will have ALL CCs deleted. |
6 |
Deleting Continuous Controller Data |
Delete Controllers |
|
Not sure. The same as “Delete Continuous Controllers”? |
? |
Deleting Controller Data |
Delete Doubles |
|
This command will delete notes that occupy the same pitch at the same time. It also works for CCs, removing consecutive extra entries with the same value. |
6 |
Deleting Double Notes |
Delete Notes |
|
Brings up the Delete Notes window, where we can select the minimum length of the notes to be deleted, the minimum velocity, and whether one or both condition should apply. |
6 |
Delete Notes Dialog |
Delete Overlaps (mono) |
|
This command will delete overlaps of events of the same pitch (overlapping unisons) Opinion: I don’t know if “mono” is a good description.
|
6 |
Deleting Overlaps |
Delete Overlaps (poly) |
|
This command will delete any overlaps of events of any pitch. (including unisons) Opinion: Unless I’m missing something, this command does exactly as “Delete Overlaps (mono)”, and more. Why does “Delete Overlaps (mono)” even exist?
|
6 |
Deleting Overlaps |
Dissolve Part |
|
Brings up the Dissolve Part window, in which we can choose to Dissolve in separate channels, or separate pitches, the option to optimize display and the option to dissolve to lanes. Note: Optimize display will remove silent areas of the resulting parts, but not when CCs are there.
|
6 |
Dissolve Part Dialog |
Drum Editor: Show Note Length On/Off |
|
Toggles Show Note Length for the Drum Editor |
3 |
Changing the Note Length |
Drum Map Setup… |
|
Opens the Drum Map Setup window. |
3 |
Drum Map Setup Dialog |
Expression Map Setup… |
|
Opens the Expression Map Setup window. |
3 |
Expression Map Setup Window |
Extract MIDI Automation |
|
Deletes all CCs of the selected part, and makes them automation lanes instead. |
6 |
Extracting MIDI Automation |
Fixed Lengths |
|
Fixes length of the events in the selection to the selected quantize value. |
6 |
Fixing MIDI Note Lengths |
Fixed Velocity |
|
Fixes velocity of the events in the selection to the selected Insert Velocity value. |
6 |
Fixing MIDI Note Velocities |
Freeze Length |
|
Not sure. I think it should control the button “Freeze MIDI Lengths” in the Length Section of the Inspector>Editor. |
? |
Key Editor Inspector |
Freeze MIDI Modifiers |
|
Freezes any MIDI modifiers currently applied from the MIDI Modifiers Section of the Inspector. This means that the Modifiers will be applied to the MIDI track (observe how the events change), and their values reset to zero. |
3 |
Freezing MIDI Modifiers |
Insert Velocity 1-5 |
|
Directly selects Insert Velocity preset 1-5 Tip: You can modify the presets from the “Insert Velocities Dialog”
|
8 |
Setting Velocity Values |
Legato |
|
Applies Legato to the selection. (Apply Legato button of Length Section in Inspector>Editor) |
8 |
Extending MIDI Notes |
“New in 11!” List Editor: Show/Hide Filters |
|
Shows/Hides the Filter Toolbar in the List Editor |
4 |
Filters Bar |
Logical Editor… |
|
Launches the Logical Editor |
6 |
Logical Editor |
Merge MIDI in Loop |
|
Merges all MIDI caught between the Left and Right Locators to the selected tracks. First brings up the MIDI Merge Options window. |
6 |
MIDI Merge Options Dialog |
Merge Tempo from Tapping |
|
Allows you to have the Tempo track follow your tapping. To do this, you need the MIDI track in Linear Time Base. Record your tapping along to the music. Then give the command. In the “Tempo from Tapping” window, select the value which you were tapping at. Done. |
4 |
Setting up a Tempo Track from Tapping |
Mirror |
|
This will mirror the selection. Works on multiple parts, works with ranges. |
7 |
Inverting the Order of Selected MIDI Events |
O-Note Conversion |
|
Performs O-Note Conversion. Pitches are set according to their O-Notes. |
4 |
Setting Pitches of Notes According to their O-Note Settings |
Open CC Automation Setup Dialog |
|
Brings up the MIDI Controller Automation Setup window, in which we configure how CC to automation transformations will be handled. |
4 |
MIDI Controller Automation Setup Dialog |
Open Insert Velocities Dialog |
|
Brings up the “MIDI Insert Velocities” Dialog, where we can set up the velocity values of the 5 Levels. |
8 |
|
Pedals to Note Length |
|
Not sure. Per manual, this command is supposed to elongate the note up to the point where the recorded sustain pedal is released, and then deletes the sustain controller. In practice, it doesn’t always work as expected, or it’s me that doesn’t understand all parameters. |
0 |
Rendering Sustain Pedal Data to Note Lengths |
“New in 11!” Pitch Visibility: On/Off |
|
When On, only used pitches are shown. |
5 |
Pitch Visibility Options |
“New in 11!” Pitch Visibility: Select Next Option |
|
Cycles between the two options: “Show Pitches with Events” and “Show Pitches from Scale Assistant”. |
4 |
Pitch Visibility Options |
“New in 11!” Pitchbend: Snap Pitchbend Events On/Off |
|
Activates/Deactivates snap for pitchbend events. |
10 |
Pitchbend Controller Lanes |
Record in Editor |
|
Activates Record in Editor. |
3 |
Key Editor Toolbar |
Repeat Loop |
|
This command is about the “Independent Track Loop”. It will fill the whole part with what’s caught in the independent loop. Opinion: Should be “Repeat Independent Track Loop” for clarity.
|
1 |
Repeating MIDI Events of Independent Track Loops |
Reset |
|
Performs a “Reset MIDI Devices” Opinion: Should be “Reset MIDI Devices” for clarity.
|
3 |
Reset Function |
Restrict Polyphony |
|
Brings up an Allow window where we set the number of Allowed voices. If we select 1, event lengths will be changed so that notes do not overlap. |
5 |
Restricting Polyphonic Voices |
Reverse |
|
This is like mirror, except it doesn’t function as I would expect. |
3 |
Reversing the Playback Order of MIDI Events |
Send All Notes Off Message |
|
Not sure if this works. Using MIDI Monitor, I don’t see any Notes Off Messages. Does it work? |
? |
|
Show Used Controllers |
|
As it says. Shows all the controllers used in a selection. If multiple parts are selected, the command will only show the controllers used by ALL parts. |
7 |
Create Controller Lane Menu |
Show/Hide Controller Lanes |
Alt L |
As it says. Note: The key for the Key Command does not show up next to the command in the “Controller Lane Setup” pop-up menu.
|
10 |
Controller Lane Setup Menu |
Thin Out |
|
Thins out MIDI data. (For example, if a CC contains a lot of redundant points, those will be removed upon using this command.) |
7 |
Thinning Out Controller Data |
Toggle Computer Keyboard Input |
|
Toggles Computer Keyboard Input On/Off in the Score Editor, allowing input of notes by pressing the respective key. (C for C, D for D, e.t.c.) Note: Score editor only!
|
8 |
Entering Notes with the Computer Keyboard |
Toggle MIDI Input |
|
Toggles MIDI input in Editors. (Record in Editor is activated automatically) |
5 |
Key Editor Toolbar |
Toggle Step Input |
|
Toggles Step Input in Editors. (Record in Editor is activated automatically) |
5 |
Key Editor Toolbar |
Transpose |
|
Brings up the “Transpose Setup” window, with options for the planned transposition. |
5 |
Transpose Setup Dialog |
Transpose Notes |
|
This command is the “Apply Transpose” Button, in Inspector>Editor Transpose Section. Once you select the number of semitones in the field, you give this command, and the transposition is applied. |
3 |
|
“New in 11!” Type of New Controller Events: Toggle Step/Ramp |
|
Well explained. |
10 |
Controller Lane Setup Menu |
Velocity |
|
Brings up the “Velocity” window, with options to select the type of velocity change, and the wanted values. |
3 |
Velocity Dialog |