Control Room GUI glitch on startup - Cubase 12 Pro (Windows 10)

[dave_besp]

The Control Room GUI in the Right Zone seems to glitch out when opening a project (existing or new).
Not a mayor issue, it resets when changing to another tab an back again, but I thought you should know anyway.
Specs below are for my main system, but I can also confirm this glitch for my laptop (win10, ryzen 5500u with integrated graphics).

System Specs:
Operating System: Windows 10 Home 64-bit (10.0, Build 19042) (19041.vb_release.191206-1406)
System Manufacturer: Micro-Star International Co., Ltd.
System Model: MS-7B49
BIOS: 1.40 (type: UEFI)
Processor: Intel(R) Core™ i7-8700K CPU @ 3.70GHz (12 CPUs), ~3.7GHz
Memory: 32768MB RAM
Available OS Memory: 32642MB RAM
Page File: 8678MB used, 28827MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 12
DX Setup Parameters: Not found
User DPI Setting: 96 DPI (100 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled

Display Devices

Card name: Intel(R) UHD Graphics 630
Manufacturer: Intel Corporation
Chip type: Intel(R) UHD Graphics Family
DAC type: Internal
Device Type: Full Device (POST)
Device Status: 0180200A [DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
Display Memory: 16449 MB
Dedicated Memory: 128 MB
Shared Memory: 16321 MB
Current Mode: 1920 x 1080 (32 bit) (60Hz)
Monitor Name: ViewSonic VG2448
Monitor Model: VG2448
Native Mode: 1920 x 1080(p) (60.000Hz)
Output Type: Displayport External
Driver Name: C:\WINDOWS\System32\DriverStore\FileRepository\iigd_dc_base.inf_amd64_26935c8c9d5bfd3b\igdumdim64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\iigd_dc_base.inf_amd64_26935c8c9d5bfd3b\igd10iumd64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\iigd_dc_base.inf_amd64_26935c8c9d5bfd3b\igd10iumd64.dll,C:\WINDOWS\System32\DriverStore\FileRepository\iigd_dc_base.inf_amd64_26935c8c9d5bfd3b\igd12umd64.dll
Driver File Version: 24.20.0100.6345 (English)
Driver Version: 24.20.100.6345

Should not be related to any plugin, as it also happens in empty projects.

[billy]

My System also Has GUI Flickering… No so in Cubase 11
Cubase 12 … VST 3 or VST 2 Graphics Glitchy / flickering inter minting but constant. Also Cubase VU meter and Project Window
. Cubase 11 dose not have this problem runs smooth. Cubase 12 settings are the same as Cubase 11

Windows 10 core i7 32 gig ram SSD OS drive GTX 1660 Card

[Luca_Miolla]

Same problem for me, if you close and reopen the right zone the problem actually reappears.
It’s not about the startup, simply everytime that zone opens it starts glitched out, until you change tab.

[dave_besp]

Thanks, I did not even try this! But now that I have, I can also confirm this. Maybe Steinberg already knows about the issue but deemed it to insignificant so they shipped the new version regardless. Yet, as I already said, it really does not bother me a lot. Apart from this glitch, Cubase 12 runs more stable and performant than any of the previous versions I had.

[Luca_Miolla]

I actually had the same problem on Cubase 11 as well
with the difference that I had a blank (or gray since I use dark mode) control room instead of that crumpled/cut version.
It also just happened after a few days of behaving nicely and I don’t recall installing any new plugin or anything special…the only softwares I installed recently are VLC and the Streamdeck software :'D

Do you have anything similar?

[dave_besp]

Sorry, I completely forgot to reply…I actually never soved this issue. It happens consistently when opening projects, even after update 12.0.70. My Laptop is now on CB13, where this seems to be solved. Disappointing however, that this could not be fixed for CB12 users.