I tried all the suggestions in this thread but nothing seems to work for my setup. AMD Ryzen 9 5900X , ASUS ProArt B550-CREATOR , AMD Radeon RX 6600 , 3 monitors all the same refresh rate, latest drivers for all the devices.
Sending you a PM.
This fix sugestion worked for me. Thank you.
1 Like
Tried all fixes and none worked for me. Intel i7 13th gen, nvidia rtx 3050 OEM, win 11⌠Tried both game and studio drivers
Thanks @Fabio_B. That worked here. No more flickering.
Thank you Fabio! I have an AMD graphic card. In the Adrenalin software I set Radeon Enhanced Sync to on. The gltches seem to be gone now. Can anyone confirm this?
For the record, I changed the graphics card, installing an AMD Radeon RX580 and I still have no problems. Iâm lucky. In any case, before as now, the refresh rate of my three different screens were all set equally to 60 Hz.
I would like to point out that I never install graphics management software like Adrenalin, but only the drivers.
2 Likes
the Nvidea setting worked for my 12900 laptop and the AMD setting worked for my 7950x DAW 
M
1 Like
âOn PCs with AMD cards, Anti-Lag was the only setting that was needed on our test machinesâ - this works for me! Many thanks!
2 Likes
That is a different issue, it´s already reported.
Wow, nice. I also had the same problem as described above making Cubase 13 unusable. The thing was that Cubase 13 on my studio computer doesnât have these graphical glitches but the version I run on this laptop were horrifying. So the problem was NOT with cubase but with the laptop.
This laptop has:
- Windows 11
- Intel i7 9th gen, 12 cores, 2.60 GHz
- 32 gig ram
- Nvidea Geforce RTX
The above presented solution for the Nvidea videocards worked perfectly. The UI became stable. Thank you very much for this workaround, and quite a simple one at that.
Yes! It worked. I had only glitches in some plugins, e.g. Imager and some other showing animated frequency curves. They are now completely gone.
Nvidia GeForce 1030
|Processor|AMD Ryzen 5 5600X 6-Core Processor 3.70 GHz|
|Installed RAM|32,0 GB|
|System type|64-bit operating system, x64-based processor|
|Edition|Windows 10 Pro Education|
|Version|22H2|
|Installed on|â2021-â12-â19|
|OS build|19045.3693|
|Experience|Windows Feature Experience Pack 1000.19053.1000.0|
Same with RTX 4080.
Just tried this workaround and it seems to have fixed the glitches. I will keep testing. Thanks.
update: glitches back. No glitches on my computer monitor but my connected large external monitor glitches. Iâm still troubleshooting.
I have just used the above workaround(s) on my NVIDIA card for Nuendo 13 on Windows 11 and it has worked a treat!!
Thank you
-
Fresh install Windows 11, 23H2, Cubase 13.0.10 only, Latest AMD Driver Adrenalin Minimal Install ⌠Glitches even with mentioned workarounds.
-
Recovered Backup Windows 11, 22H2, Cubase 12.0.70, Cubase 13.0.10, 3 monitors set to 75Hz, AMD Driver only (Ver 31.0.14037.17019 April 24, 2023) ⌠No GUI issues.
-
Hardware: Strix Z790-E, Vengeance DDR 5, Asus Dual Radeon RX 6600.
Perplexed, but happy itâs stable (knock on wood) with 22H2 Backup. But wonât be surprised now if issues show themselves .
I know the feeling but this is one more step to thinking itâs the C13 UPDATE exe which contains an issue with the previous C12 , ive found the same , C13 ultra stable from a fresh install , perplexed having to go this route as you say but in the end if you want a stable new version ⌠itâs the onlt route
AMD, Single Ultrawide Monitor user, have created an Adrenalin Profile, set to default performance and switched on Radeon Anti-Lag and all seems good, no more glitches.
@Fabio_B
I think i tracked down the cause of this bug , i think itâs related to the flickering of the Supervision , if i remove supervision from the inserts then all works as expected , adding Supervision , in this case the VU meters on the mixbuss , causes this behaviour when pressing the top two rows of pads in Pattern mode