After a hiatus I’ve just upgraded to Cubase 15. It all works fine expect for audio inputs. Control Room is disabled, all ins and outs are active and set to the driver, all the routing is set up as it should be. The only thing I can think is, I’ve got a Behringer driver ‘USB Audio CODEC’ but in studio setup it’s appearing as USB Audio CODEC (2)’ and I cannot get any input sound at all. Any ideas? It’s driving me crazy.
Hi, @111135
Could you make a screenshot of the available drivers listed in the Studio > Studio Setup > Audio System > ASIO Driver dropdown menu ?
Beside this, it would help us to know exactly what OS and audio interface you are working with, as there are many different Behringer units available. And if you are using a Windows based system, I would also suggest to try the Steinberg built-in ASIO driver (eventually, if you don’t have it installed, it is downloadable here). What happens, in this case ?
Could be mic permissions in windows…particularly if you did any windows update in the hiatus from Cubase - otherwise some screen caps as suggested would be helpful.
Cheers. I’m using a Behringer U-Phoria UM2 on a Mac. It’s a new Mac with only USB C connections and the connections on the driver are USB A & B. I don’t think that makes a difference as I can hear all the output I just can’t get the inputs to work. When I press Direct Monitor I can hear it so I’m clearly doing something wrong. I’m a total novice as you’ll see from my BUS set ups. Any help would be greatly appreciated.
Hi again,
I’m not a OSX specialist (Windows 10 user, here), but let’s try to take everything from the start…
That’s probably because you use the Direct Monitoring function of your unit, so the sound comes right from it, Cubase being left beside in the process. I would deacticvate it, at first and for troubleshooting purposes, when using Cubase.
After this, I would only keep, in the Inputs panel of the Audio Connections window, just two mono busses (as there is no stereo inputs) : one connected to Front Left, and the other to Front Right. IOW, keep your Mono In 1 as it is, create a Mono In 2 equivalent connected to Front Right and get rid of everything else.
Once done, and providing that you’ve been able to find an USB-B to USB-C connector, I would first launch Cubase, start an empty project and create just an audio track. In the Add Track window, there is an essential setting : the Input Routing one. Choose a relevent option, which means corresponding at one of the sources that you will use with your unit, such as a mic connected to your combo (MIC/LINE 1) input (with eventually, the phantom power - 48V set as ON, if it’s a condenser one), or a guitar to INST 2. Seeing your Audio System panel screenshot, I would choose Front Left, when using a mic with an XLR connector or Front Right if you are having a guitar connected to INST 2.
Additionaly, keep the Configuration to ‘Mono’ and Output Routing as Stereo Out, as it should be by default.
Once the track created, click on its Monitor button (the one with a little speaker in it, either in the header of your track or in the track inspector). Do you get a sound when using a source ? Is there an audio signal shown in the meter ?
Could be mic permissions in windows
I’m using a Behringer U-Phoria UM2 on a Mac
Then it’s almost certainly mic permissions on the Mac.
Thanks for the help. It turns out it was a faulty input on the driver!


