Nuendo hijacks ARC USB, freezes GUI or gets very laggy when USB controllers are connected

Hi there,

Since I started using Nuendo 15, I noticed two things.

One, it “hijacks” RME ARC Usb and cuts its communication with Totalmix, even if it is disabled in MIDI Port Setup.
Two, the GUI either gets very laggy, like refreshing every minute or so, or outright freezes up, while it keeps playing in the background.

This started happening with the ARC Usb, and later on with my Behringer X-Touch One as well.
Whenever this happens, if I disconnect the device from the computer, Nuendo comes back to normal behavior instantly.

I haven’t changed any settings, and this never happened with Nuendo 14.

Has anyone seen this behavior? Any tips on how to solve it?

Steps for reproducing:

  1. Have an RME ARC Usb or Behringer X-Touch One connected to your computer via USB.
  2. Wait for Nuendo to freeze up the GUI
  3. Disconnect the device.
  4. Outcome: Nuendo unfreezes INSTANTLY upon disconnection and behaves normally.

Furthermore, even when it doesn’t freeze up, ARC Usb and X-Touch frequently malfunction, losing connection to Totalmix and Nuendo respectively. This also never happened in Nuendo 14.
EDIT TO ADD: Sometimes the X-Touch will stop working for things like fader, transport, jog wheel, etc. But it will keep updating the scribble strip when I select tracks.

My system info is in my profile. Windows 11 is up-to-date (I can’t pinpoint this problem to any windows updates, but I wouldn’t dismiss the possibility).
Here’s a screenshot of my MIDI port setup:

Note: the behavior is the same wether “WinRT MIDI” is enabled or not.

All help is welcome.

Thank you!

Was Nuendo 14 on the same PC?

Not sure if it has the same options as Cubase, but when Cubase starts up and sees a new MIDI port pair, it will send it either a MIDI-CI discovery request or an older-style SysEx Identity request. (Both are SysEx). Not all devices handle that well. I recall that the ARC has some issues with SysEx unless you move to the newer TotalMix, and the XTouch just has issues, period.

You can try unchecking this option if it is enabled.

Pete
Microsoft

Hi Pete, thank you for your help!

Yes, Nuendo 14 is on the same computer, same windows installation.
MIDI-CI Support is disabled, unfortunately.
I also have the newest TotalMix.

Additional info is that sometimes Nuendo will hang on “Initializing all MIDI Inputs” on startup, and will move on with the startup upon disconnection.

Thanks again!

Hi, I’m also using ARC USB in combination with a Fireface UFX+. Latest drivers, latest TotalMix FX version. But I’m on Mac (macOS 26.7, Nuendo 15.0.30) and connected the ARC USB directly to the UFX+.
I don’t have any problems you describe. So maybe you try connecting ARC USB directly to your interface and see if the ARC USB related problems are gone? Best

Hey thanks for the input!
Yes, I’m planning on being able to do that soon, but I have the original UFX and unfortunately it doesn’t support direct connection between the interface and ARC USB.
If I’m lucky I’ll be able to upgrade within six months.

But I have tried disabling “MIDI Thru Active” in preferences and for the first time ARC has been stable! Perhaps that was jumbling things up. Trying to not celebrate too soo, but I’m hopeful.

Thanks again!

EDIT: Nope, it was only a matter of time. Frozen again, unfrozen immediately upon disconnection.

That sounds like one of the issues with the new MIDI stack in Windows 11 and certain legacy MIDI drivers.

Thank you, MrSoundman!
I’ll check it out.

The ARC used to hang because of SysEx problems.

But the latest TotalMix fixed that. I even purchased an Arc here to test with. I had met with the RME folks at Superbooth to discuss.

The latest TotalMix is from just over a week ago.

Pete
Microsoft

Oh, I totally missed this last update! I thought you meant Totalmix 2.0.

Thanks a lot, Pete! Installing it right now!

EDIT: Unfortunately it didn’t solve the issue. After a couple of hours ARC Usb lost connection again. :frowning:

FYI. I don’t get email notifications of edits, so I thought this was solved.

I recommend asking RME on this. I’m out of ideas, unfortunately. If it’s a Windows issue, they have my email address. But I’m not seeing anything here at the moment that points that way.

Pete
Microsoft