(SOLVED) Подключение миди-клавиатуры Korg microkey2-37

Здравствуйте. Нужна помощь по Korg.
Работаю в Cubasis 3. Появилась проблема с миди-клавиатурой Korg. Когда переключаю другую дорожку, клавиатура играет одновременно нынешний и прошлый треки. При этом отключаю предыдущий трек через «mute», это помогает, но когда включаю трек обратно, снова играют обе дорожки. Пробовал перезагружать клавиатуру и переустанавливать Cubasis. Ничего не помогает!!!

Встроенная экранная клавиатура работает, а подключённая миди не работает.

Hi @Pavel_Kolesnichenko,

Thanks for your message.

Please double check that “MIDI Input Only for Armed Track” is enabled under “Setup/MIDI”. Same should be the case for “Arm Selected Track” located under “Setup/General”.

Normally, CC compatible hardware should properly right away with Cubasis once connected.

You may give your setup a reset, via these steps:

  • Load the “New Project” template
  • Close all running apps, including Cubasis
  • Fully shut down the iPad
  • Disconnect the hardware

Does things work as expected, once you’ve restarted the iPad and Cubasis and reconnected the hardware?

If the problem persists, we suggest to get in touch with Korg. We’re at hand to provide them with a promo code for testing purposes, if required.

Hope that helps!

Stay safe
& best wishes,
Lars

Ларс, СПАСИБО!!! Вроде бы помогло;)))

Удачи Вашей компании!!! Вы - лучшие!!!

1 Like

Hi @Pavel_Kolesnichenko,

Thanks for your updated message.
Glad to read everything works as expected… :slight_smile:

Enjoy making music
& stay safe and sound,
Lars

1 Like