| Record - Deactivate Punch In on Stop |
|
Activates/Deactivates. Self-explanatory. When activated: Pressing stop will deactivate punch in. Secures one-off punches, eliminates the need to micromanage punch in activation/deactivation. |
3 |
Record |
| Record - Stop after Automatic Punch Out |
|
Activates/Deactivates. Self-explanatory. When activated: If Punch Out is activated, when record reaches that point, Stop will be pressed. In the same vein as above, it makes for more focused one-off punches. |
3 |
Record |
| Scrub - Use High Quality Scrub Mode |
|
Activates/Deactivates. Per manual: Enables effects for scrubbing and uses a higher resampling quality. However, scrubbing will be more demanding on the processor. |
3 |
Transport - Scrub |
| Scrub - Use Inserts While Scrubbing |
|
Activates/Deactivates. Self-explanatory. |
3 |
Transport - Scrub |
| Tools - Select Tool: Show Extra Info |
|
Activates/Deactivates. When activated, the select tool is accompanied everywhere by a tooltip that shows the part’s name and the time position over which the mouse cursor hovers. |
5 |
Editing - Tools |
| Tools - Show Horizontal Cross-Hair Cursor Line |
|
Activates/Deactivates. When activated, the draw, split, and line tools will get a horizontal line, forming a crosshair at the exact position of the mouse cursor’s edge. |
3 |
Editing - Tools |
| Tools - Show Notification when Switching Tool Mode with Key Command |
|
Activates/Deactivates. When activated, a notification will be shown in the middle of the screen every time you switch the modes of a tool with a key command. |
3 |
Editing - Tools |
| Tools - Show Toolbox on Right-Click |
|
Activates/Deactivates. When activated, right clicking will bring up the toolbox. When deactivated, it will bring up the “regular” right click menu, which has the tools one level deep, but also more contextual functions. Comment: An infamous preference, due to the fact that the right click menu available now has seen some pruning, and users want the removed functions back.
|
3 |
Editing - Tools |
| Tools - Show Vertical Cross-Hair Cursor Line |
|
“Changes”", does not inform of state. Well, when activated, the draw, split and line tools will get a vertical line, forming a crosshair at the exact position of the mouse cursor’s edge. |
3 |
Editing - Tools |
| Tools - Zoom Tool Standard Mode: Horizontal Zooming Only |
|
Activates/Deactivates. When activated, using the Zoom Tool will only allow Horizontal Zooming. |
3 |
Editing - Tools |
| Track & MixConsole Channel Colors - Auto Track/Channel Color Mode |
|
Cycles between “Use Track’s Default Color”, “Use Previous Track Color”, “Use Previous Track Color +1”, “Use Last Applied Color”, “Use Random Track Color”. All these determine what color the next created track shall be. |
6 |
User Interface |
| Transport - Clicking Locator Range in Upper Part of the Ruler Activates Cycle |
|
Activates/Deactivates. When activated, clicking on the upper part of the ruler between the left and right locators will activate the “cycle” (loop) |
3 |
Transport |
| Transport - Locate when Clicked in Empty Space |
|
Activates/Deactivates. When activated, clicking in empty space in the project window the move the cursor to the click’s position. Comment: People are asking for this feature to be extended to the MIDI editors.
|
3 |
Transport |
| Transport - Playback Toggle Triggers Local Preview |
|
Per manual: Allows you to use Space on your keyboard to start/stop local playback of the selected file in the Sample Editor or the Pool. When the Sample Editor is not open or when there is no audio file selected in the Pool, Space still toggles the global project playback. |
3 |
Transport |
| Transport - Return to Start Position on Stop |
|
Activates/Deactivates. When activated, pressing stop will return the cursor to where it was when start was pressed to initiate playback. |
3 |
Transport |
| Transport - Show Timecode Subframes |
|
Activates/Deactivates. Self-explanatory. When activated, subframes will show too for timecode. (It goes without saying that a ruler must show timecode for this to work.) |
3 |
Transport |
| Transport - Stop Playback while Winding |
|
Activates/Deactivates. Self-explanatory. When activated, if you press rewind or forward while the project is playing, stop will be pressed, and when you finish winding you’ll need to press play again. When deactivated, you can wind while the project is playing, and once you cease winding, playback will resume. |
3 |
Transport |
| Transport - Zoom while Locating in Time Scale |
|
Activates/Deactivates. Self-explanatory. When activated, clicking and dragging up/down on the ruler will zoom out/in respectively. |
3 |
Transport |
| VariAudio - Inhibit warning when applying Offline Processes |
|
Per manual: Inhibits the message that warns you when you apply offline processes to audio material that is used in several places in the project. |
3 |
VariAudio |
| VariAudio - Inhibit warning when changing the Sample Data |
|
Per manual: Inhibits the message that warns you when you modify audio material that is used in several places in the project. |
3 |
VariAudio |
| Video - Extract Audio on Import Video File |
|
Activates/Deactivates. Self-explanatory. When activated, importing a video file will extract the audio too. |
3 |
Video |
| VST - Activate ‘Link Panners’ for New Tracks |
|
Activates/Deactivates. When activated: If you create a new track, the pan of its sends will automatically follow the panner of the channel itself. When deactivated, you have to set the sends pan manually. |
3 |
VST |
| VST - Auto Monitoring |
|
Cycles between “Manual”, “While Record-Enabled”, “While Record Running” and “Tapemachine Style”. |
4 |
VST |
| VST - Connect Sends Automatically for Each Newly Created Channel |
|
Activates/Deactivates. When activated: If you have FX tracks created, and then you create audio/instrument/sampler tracks, those will have their sends automatically connected to the existing FX tracks. |
3 |
VST |
| VST - Default Send Level |
|
Cycles between “0dB”, “-6dB”, “-12dB”, “-inf. dB”. |
3 |
VST |
| VST - Default Stereo Panner Mode |
|
Cycles between “Stereo Dual Panner (Remote Control Devices Only)”, “Stereo Combined Panner”, “Stereo Balance Panner” |
3 |
VST |
| VST - Do Not Connect Input/Output Busses When Loading External Projects |
|
Activates/Deactivates. Per manual: Prevents connecting input and output busses to the ASIO ports of your system when loading external projects. |
3 |
VST |
| VST - Group Channels: Mute Sources as well |
|
Activates/Deactivates. When activated: Muting a group channel will press mute on the source channels too. |
3 |
VST |
| VST - Instruments use Automation Read All and Write All |
|
Activates/Deactivates. When activated, pressing the “Activate/Deactivate Read (or Write) for All Tracks” will affect instruments too. Comment: It doesn’t seem to work? Activated or Deactivated, instruments still get the R and W when giving the command for all tracks. Maybe I don’t understand the preference?
|
0 |
VST |
| VST - Mute Pre-Send when Mute |
|
Activates/Deactivates. When activated, muting a track will also mute its “pre” sends. |
6 |
VST |
| VST - Warn on Processing Overloads |
|
Activates/Deactivates. When activated, when a cpu overload/audio dropout is detected, a message will pop up where you must confirm to continue. |
3 |
VST |