Missing/Hidden? Mixer Channels

I have a large project with missing mixer channels. I am using ARIA (multi) players. The mixers for Flute 2 and Clarinet 1 are missing. They are in the Endpoint Setup for 02 ARIA Player (Multi). The Output channels are set correctly (3/4 for Flute 2 and 5/6 for Clarinet 1). After capturing the images below I added notes to measure 2 for both Flute 2 and Clarinet 1 so that I could select multiple notes and hit the “P” key to play that channel alone. They both play correctly on their respective channels. I can see than by selecting each and watching the keyboard in ARIA as they play. I have also played these measures multiple times scrolling so that I could observe all of the mixer channels to make sure that the output isn’t going to some other mixer channel. It is not. I also raised and lowered the volumes of Flute 1 and Clarinet 2 and that does not affect Flute 2 or Clarinet 1.

I have attached the test project that I created by exporting a flow then deleting the music and adding notes to measure 1 for every instrument.

Am I missing something simple? I have done some internet searching with results that indicate channels may be hidden, but I can’t find that capability by searching the Dorico documentation or on the Dorico forums. The only ability to hide mixer channels that I can find is to use the Instruments/MIDI/FX/Unused buttons.

Missing mixer channels-flute 2 clarinet 1.dorico (2.0 MB)

Note that I also set the Player of Flute 2 to — then set it back to 02-ARIA Player (Multi) channel 2 and that did not cause a mixer to appear for it.

I also opened the Endpoint Setup dialog and activated Number of audio outputs to show in Mixer and set it to 16. That did not change anything.

Try clicking the Unused button in the mixer.

Dorico created a couple of unused ARIA Players as I was troubleshooting. (An irritating behavior.) Once I got rid of them there are no unexpected unused output channels. None at 3/4 or 5/6 where the Flute 2 and Clarinet 1 are. I have seven ARIA multis 02 through 08) and one Kontakt 7 instance.

Sorry, I don’t have ARIA so I can’t troubleshoot the project. When you select Unused, do more mixer strips appear? If you hear Flute 2 and Clarinet 1, they are definitely coming out of a mixer strip.

I opened the project I created the test project from. Showed the unused mixer channels. Then played a long flute section so I could scroll through all of the mixers to look for any showing activity (with two measures of flute 2 selected and using P to play so that only flute 2 would play). There was no activity anywhere, yet flute 2 is playing.

There is something odd though. If I click on a Flute 1 note, it is dry, no reverb. If I click on a Flute 2 note, there is reverb. I was trying to learn how use Live Stage and in that process it created a Reverb channel. The reverb channel shows no activity when I play Flute 1 but it does show activity when I play Flute 2. They both use the same expression map and Apply Stage Template settings is not checked in it. Same thing with Clarinet 1 and Clarinet 2. The one missing a mixer channel is playing through Reverb. Once Dorico creates that Reverb channel, how can I get rid of it?

I have clicked on notes from a number of other instruments and they are not causing activity on that Reverb mixer channel. That explains some weirdness I was hearing this morning in the clarinet part where a staccato note seemed to be held too long.

So, Live Stage seems to have made some “interesting” changes. Is there a way to undo them?

I deleted the Reverb FX channel. Now flute 2 and clarinet 1 play, but the only mixer channel showing any activity is the Output channel.

sounds like things got a bit scrambled. You’ll have to wait for someone from the team to chime in (or someone that has ARIA).

Have you tried reapplying the space template then the stage template? I know you can’t reapply the playback template, but that would certainly clean things up.

Thanks,

I will have to live with it for now. It sounds like the mixer volumes for Flute 2 and Clarinet 1 are both at the default. I need to get back to going through the project and balancing the volumes. I am working to produce audio files for a developmental production of my musical. No live musicians at this stage. Just a few performances to get feedback from the audience and everybody involved in the production. The theatre is in-the-round, so I’m not sure what Live Stage can do about that. I’ll have to work with their sound designer to find out what he wants.

I enabled Live Stage in the expression map used by the flutes and clarinets (and all of the other wind instruments). It didn’t make the missing Flute 2 and Clarinet 1 mixers reappear.

But there is very odd behavior with Flute 1, Flute 2, and Clarinet 1. Look at the upper right corner of the Live Stage. Flute 1, Flute 2 and Clarinet 1 are on top of each other. If I try to move one away, it shows it until I release my click after the drag. Then they all move to that spot to be on top of one another. I can’t separate them. But they aren’t all using the Flute 1 mixer. If I delete music in flute 1 and solo it then play, I get nothing. Same goes for soloing Clarinet 2.

So, something seems to be very wrong here.

Perhaps they are all assigned to the same Player or channel.

Proofreading panel thinks so for some instruments, but not for Flute 1 and 2 as far as I see :slight_smile:

Bassoon and Contrabassoon both having notes is a mistake. I’ll have to fix that.

But, in the full orchestral arrangement, the players Flute 1, Flute 2, Clarinet 1 and Clarinet 2 hold only one instrument each.

Down in the 5-piece ensemble arrangement I have two synthesizers, each with a player for the left and right hands, and each of those players hold multiple instruments (synth patches). I’ve tried to leave a few beats of rests for patch changes (at least) but I may have slipped up here and there.

I haven’t run a proofreading check for a while. I’ve been making a lot of changes and nothing will be in front of live musicians (other than singers) for four or five months.