UR22 cuts out intermittently

Yes, the ‘only’ thing in my USB2.0 port is the interface.

I may just throw in a PCIe Usb controller again and see what happens.

I have already tried that twice previously with the two I have sitting around here. Maybe after the new updates they will show improvement?

Again, Ugh…

Hmm. Feeling prompted to have a look at my USB set up again just then, I see that during my earlier tinkering with USB drivers I’d inadvertently reduced all my USB ports to USB 2.0 speeds. I found a restore point I made just before my tinkering so I just restored. And now my USB 3.0 ports are back, but now Intel USB 3.0 eXtensible Host Controller is really busy again in Latency Monitor, and the dropouts have increased.
I feel certain that this is to do with USB drivers and how they all talk to each other!

Keep going man! :slight_smile:

Either we solve this issue ourselves or we rebuild… I would rather solve it.

Just updated my BIOS and no change. I have the A/I sitting in my mobo in it’s own USB 2.0 strip, so that 2 port USB hub is only running the A/I and that doesn’t help either. I’ve tried all 12 USB ports (6 USB2/ 6 USB3), and like 6 different USB cables, and still, no change. To say I’m fed up with this problem is a complete understatement

Have you tried uninstalling Intel USB 3.0 eXtensible Host Controller (either from Programs and Features, or maybe in BIOS might be better)? Definitely worth creating a restore point before you do it because it unexpectedly disabled most of my USB ports, but I know it’s helped for some people. The main downside is that it downclocks all your USB ports to USB 2.0 speeds.(It doesn’t usually disable them - it was weird that it did that in my case).

Continuing the USB driver line of enquiry, has anyone tried different Yamaha Steinberg USB Drivers to see if they make a difference?

I actually could care less to have USB3 port speed if my interface will work without dropouts.

I may give that a shot first as I am not looking forward to the 20 hours it will take to reinstall Windows and all of my third party software after installing a new MOBO…If MS will even allow me to use my W7 64 Pro OEM on a new MOBO. They are sure breaking down my door to install W10.

Which brings on another option… Huh?

I have had the same issue before the latest Steiney UR series drivers and software updates - after the new system build with ASRock board.

I have one large project to finish before I make any drastic moves. May be a couple weeks before I pull the trigger and start rebuilding. I sure hope someone comes up with an answer before.

Sending my own support request now.

Have you tried disabling C-states in BIOS?
It’s an oft mentioned area for latency related issues but I haven’t tried it as I’m not entirely sure which ones to touch.

Yep. Everything related to power saving or throttling is disabled.

I just purchased another PCIe USB2 controller. Gonna give it a try before I buy another manufacturers interface and hope the issue is just between the UR interface and the mobo. Otherwise time to get a different mobo and reinstall everything again.

I haven’t found anything via Google about any other interface having issues with the board.

And I have absolutely no latency issues. I can run huge projects monitoring through Cubase recording vocals with under 7ms latency.

It’s been 4 days since Steinberg has gotten back to me. Getting a little tired of this on and off support.

We can only hope they are building a PC with a ASRock mobo for testing…

What about disabling CPU parking? This is apparently separate to disabling C-States.
(Forgive me for trotting out first-rung suggestions!)

Newest update from Steinberg:

“I am checking with the developers to see if they have any other suggestions. I have not had any other UR22 customers on Windows 10 have this issue once they installed the Win10 Tools for the UR22. As soon as I have further information I will let you know. Thank you.”

Hi friends

Slightly off topic but I have the exact same issue with my UR44.

It doesn’t matter if I’m using Cubase, Winamp, VLC Player, Rekordbox… even watching YouTube videos in Chrome. Infrequent <0.5s dropouts. DPC Latency Checker shows no spikes whatsoever. LatencyMon is a different story but it goes into the red even when I’m not having dropouts, so go figure.

I’ve tested my exact setup with my old Scarlett Focusrite 2i2 AI, as well as my mobo’s native sound (Realtek drivers etc.), and the issue does not occur with either of them.

I’m probably going to RMA the thing on the weekend, unless… unless Steinberg Support pull through with a big ol’ win for us! GO STEINBERG!

Specs:
Mobo: Gigabyte GA-Z97X-Gaming 7 (Rev 1.0)
CPU: Intel i7-4790k
GFX: NVidia GTX 980 (355.98 drivers)
RAM: G.Skill Trident-X 16GB (8Gx2) DDR3-2133
OS: Windows 7 64-bit SP1 (fully updated bar Microsoft Silverlight)
HDDs:

  • OS installed on a Samsung 840 Series SSD (250gb).
  • WD Black SATA 4TB (storage, applications)
  • WD Green SATA 3TB (storage)
  • Samsung 840 EVO Series (500gb) (games)
    Sound: Steinberg UR44 USB audio interface
    Mouse: Razer Deathadder Chroma
    KB: Razer Blackwidow Ultimate 2013

Great news!

I also had reply from Steinberg support today and have replied to their questions. Hopefully we can get this figured out. :slight_smile:

It seems obvious to me that there must be some kind of issue with the mobo usb drivers and/or how they are communicating with the UR series interfaces. Or maybe some issue with the setup in UEFI setup software on the board that we are missing. IDK.

But obviously Steinberg wishes their customers to be able to use their product with any and every popular system. I bet this gets figured out. :slight_smile:

Please share as soon as you come across as positive result!!

Absolutely!

I just disabled C-states and enabled a USB patch within the BIOS, so I’m hoping that helps. Running tests now.

Fingers crossed!
Avryluy, is that your own initiative or is it something Steinberg advised you to try?
Also, in my AsRock Bios I have a couple of USB settings that I’m yet to experiment yet: Legacy USB Support, and Legacy USB 3.0 Support. They’re enabled by default but the manual recommends disabling if having ‘USB compatibility issues’. Maybe worth trying?

Hi lads, got the same issue with my UR28M. Drop outs in Windows 10 64b, same in Windows 8.1 64b, only OS without any drops is Windows 7 64b. Same tools installed on every OS (tool ver.2.1.2) All windows or bios power settings/restrictions has been untouched.


ASrock x99 extreme4 mobo, 5820K, 16gb crucial

D.

It was something I decided to try on my own. Didn’t fix it, but the dropouts decreased a little bit