Recording left and right hands separately 2

Hello Cubasians !


I have four tracks, I have two octaves on a keyboard, and I want to know what I must to write on Input Midi Transformer Plugin Effect window for each track for having situation 5.
Thankyou

Hi,

Do you want to pass the “white notes” to the track or filter them out, please?

If you want to filter them out, use this formula:

Filter Target
Type Is | Equal | Note | And
Pitch | Equal | F3 | Or
Pitch | Equal | B3 | Or
Pitch | Equal | F4 | Or
Pitch | Equal | B4

Action Target

Function: Filter

If you want to pass only these notes, use Unequal instead of Equal for all 4 “Pitch” lines.

Hello @Martin.Jirask!
No Boss.
I want this for four zones of Keyboard, each zone with his track:

There are used 2 modules per Track, meaning 8 modules. :slight_smile:

Hi,

Then setup individual Input Transformer for every single track. Every single Input Transformer will pass/filter only the Notes you want at the dedicated track.

We need modules like this:


and like this:

to have this:

For this:

Hi,

Sorry, you still didn’t answer my question, if you want to filter or pass the white keys on your scheme. In any case, you can solve it by only one Module, I sent you.

Sorry i was editing my last post. Please see my last edit,
Thankyou.

Hi,

Sorry, I still don’t understand your color coding and your goal. In the Score, I can see the very same notes on all 4 tracks.

Yes they are the same notes for all instruments. There are basically 4 keyboards in one keyboard.
This topic is about using 4 parts using a single keyboard

OK, again… Do you want to pass the white note to the track 5 or do you want to filter the white notes out? What is your goal?

please wait a minute to read your comment and to translate it and to understand what do you wrote …

I would like to use a single keyboard as if I had 4 keyboards placed one under the other.
Each keyboard starts with note C3 and ends with note E3.
The point is that it is necessary to translate the musical notes on the keyboard, so that there are 4 keyboards that start with C3 and end with E3.

So do you want to transpose the notes?

  • Track 1: Keyboard range C3-B3, Cubase range C3-B3 => no transpose.
  • Track 2: Keyboard range C4-B4, Cubase range C3-B3 => transpose 1 octave down.
  • Track 23 Keyboard range C5-B5, Cubase range C3-B3 => transpose 2 octaves down.

Am I right?

If I understand well, you want 4 ranges of keys, which would deliver the same pitches. I would do it, more or less, this way :

1st track :

Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Outside range             C3                 F3

                                   Function       Filter

2nd track :

MODULE 1
Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Outside range             F#3                 B3

                                   Function       Filter

MODULE 2 
Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Inside range              F#3                 B3

Action target          Operation                 parameter 1         parameter 2
Value 1                Substract                 6

                                  Function       Transform

3rd track :

MODULE 1
Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Outside range             C4                 F4

                                   Function       Filter

MODULE 2 
Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Inside range              C4                 F4

Action target          Operation                 parameter 1         parameter 2
Value 1                Substract                 12

                                  Function       Transform

4th track :

MODULE 1
Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Outside range             F#4                 B4

                                   Function       Filter

MODULE 2 
Filter target          Condition                 parameter 1         parameter 2        bool
Type is                Equal                     Note                                   And
Pitch                  Inside range              F#4                 B4

Action target          Operation                 parameter 1         parameter 2
Value 1                Substract                 18

                                  Function       Transform

For the three last tracks, TWO modules has to be activated, the Function setting of the former being set as Filter and the second as Transform.

After this, maybe I got it all wrong about your needs…

3 Likes

m-audio-keystation-3.akai-lpk
Yes, this topic is about transposing of note ranges.
:slight_smile:
Yes @Martin.Jarek, Yes @cubic13
And what we need to put there on module 2 ?

ThankYou @Martin.Jarek, ThankYou @cubic13.
I will try to see If Your solution works.
Now i go to eat . :slight_smile:

Hello Martin.Jirsak
Now I am on laptop keyboard. :slight_smile:
I will try the solution of Cubic13.
My wish is this:
Track 1: Keyboard range C3-E3, transposed to C2-E2
Track 2: Keyboard range C3-E3, transposed to F#2-Bb2
Track 3: Keyboard range C3-E3, without transpose
Track 4: Keyboard range C3-E3, transposed to F#3-Bb3
From now, please, wait until i will be back with news.
Reedit:
Ups ! Maybe correct is this:
Track 1: Keyboard range C2-E2, transposed to C3-E3
Track 2: Keyboard range F#2-Bb2, transposed to C3-E3
Track 3: Keyboard range C3-E3, without transpose
Track 4: Keyboard range F#3-Bb3, transposed to C3-E3


Works, but the Track3 and Track4 tracks do not change the Program (General Midi sound number)
Here are tracks:

And here are 4 midi keyboards on one Akai lpk25 Midi Keyboard

:wink:

This topic is the enhanced version of the topic
Recording left and right hands separately
located at

Pane Martine Jirsaku, koupil jsem Cubase Pro 11 a Arturia v 8 z obchodu Kytary.
Nechte hudbu hrát!
:slight_smile: